NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
Defining and Editing User Policies
To define user access policies:
1.Click Add Policy on the Edit User Settings screen. An Add Policy window will display.
Figure
2.In the Apply Policy To
3.Enter a name for the policy in the Policy Name field.
SSL VPN Concentrator policies apply to the destination address(es) of the SSL VPN 
connection, not the source address. You cannot permit or block a specific IP address on the Internet from authenticating to the SSL VPN Concentrator through the policy
engine.
•If your policy applies to a predefined network resource, select the name of the resource from the Defined Resource menu. For information about creating network resources, refer to Chapter 8, “Network Resources”.
•If your policy applies to a specific host, enter the IP address of the local host machine in the IP Address field.
•If your policy applies to a network, enter the network address in the Network Address field and the subnet mask in the Subnet Mask field.
4.Select the service type from the Service
5.Select PERMIT or DENY from the Status
Group and User Access Policies |