NETGEAR RP614 v4 manual Testing the Path from Your Computer to a Remote Device

Page 60

RP614v4 Cable/DSL Router Reference Manual

If the path is not functioning correctly, you could have one of the following problems:

•Wrong physical connections

–Make sure the LAN port LED is on. If the LED is off, follow the instructions in “LAN or Internet Port Lights Not On” on page 5-2.

–Check that the corresponding Link LEDs are on for your network interface card and for the hub ports (if any) that are connected to your workstation and router.

•Wrong network configuration

–Verify that the Ethernet card driver software and TCP/IP software are both installed and configured on your computer or workstation.

–Verify that the IP address for your router and your workstation are correct and that the addresses are on the same subnet.

Testing the Path from Your Computer to a Remote Device

After verifying that the LAN path works correctly, test the path from your computer to a remote device. From the Windows run menu, type:

PING -n 10 <IP address>

where <IP address> is the IP address of a remote device such as your ISP’s DNS server.

If the path is functioning correctly, replies as in the previous section are displayed. If you do not receive replies:

–Check that your computer has the IP address of your router listed as the default gateway. If the IP configuration of your computer is assigned by DHCP, this information will not be visible in your computer’s Network Control Panel. Verify that the IP address of the router is listed as the default gateway. For details, refer to “Preparing a Computer for Network Access” in Appendix B.

–Check to see that the network address of your computer (the portion of the IP address specified by the netmask) is different from the network address of the remote device.

–Check that your cable or DSL modem is connected and functioning.

–If your ISP assigned a host name to your computer, enter that host name as the Account Name in the Basic Settings menu.

5-6

Troubleshooting

v3.1, June 2008

Page 59 Page 61
Image 60
Page 59 Page 61
Contents RP614v4 Cable/DSL Router Reference Manual Trademarks Customer Support V3.1, June Contents Chapter Advanced Configuration of the Router Appendix a Technical Specifications Viii About This Manual Audience, Scope, Conventions, and FormatsTypographical Conventions How to Use This Manual How to Print this ManualManual Scope Printing a Chapter Xii Package Contents Chapter IntroductionRouter’s Front Panel Status Light DescriptionsInstalling the RP614v4 router RP614v4 Cable/DSL Router Online Setup ManualsRouter’s Rear Panel Maintenance and Support Chapter Content Filtering Content Filtering OverviewBlocking Access to Internet Sites Blocking Access to Internet Services RP614v4 Cable/DSL Router Reference Manual Configuring a User Defined Service Configuring Service Blocking by IP Address RangeScheduling When Blocking Will Be Enforced Viewing Logs of Web Access or Attempted Web Access Log entry descriptionsLog action buttons Configuring E-Mail Alert and Web Access Log Notifications RP614v4 Cable/DSL Router Reference Manual Chapter Maintenance Viewing Router Status InformationThis screen shows the following parameters Router Status FieldsConnection Status Items Router Statistics Items Configuration File Management Viewing a List of Attached DevicesRestoring and Backing Up the Configuration Erasing the Configuration Upgrading the Router SoftwareChanging the Administrator Password RP614v4 Cable/DSL Router Reference Manual RP614v4 Cable/DSL Router Reference Manual Advanced Configuration of the Router Configuring Port TriggeringAdvanced Configuration of the Router Click Add Service Configuring for Port Forwarding to Local Servers Adding a Custom Service Click the Add Custom Service buttonEditing or Deleting a Port Forwarding Entry Local Web and FTP Server ExampleMultiple Computers for Internet Game Example Configuring the WAN Setup Options Setting Up a Default DMZ ServerDisabling the SPI Firewall Responding to Ping on the Internet WAN PortUsing the LAN IP Setup Options Setting the MTU SizeConfiguring LAN TCP/IP Setup Parameters Using the Router as a Dhcp server Using Address ReservationUsing a Dynamic DNS Service Configuring Static Routes RP614v4 Cable/DSL Router Reference Manual RP614v4 Cable/DSL Router Reference Manual Enabling Remote Management Access Using Universal Plug and Play UPnP RP614v4 Cable/DSL Router Reference Manual Chapter Troubleshooting Power Light Not OnBasic Functioning Troubleshooting the Web Configuration Interface Lights Never Turn OffLAN or Internet Port Lights Not On Troubleshooting the ISP Connection RP614v4 Cable/DSL Router Reference Manual Troubleshooting a TCP/IP Network Using a Ping Utility Testing the LAN Path to Your RouterTesting the Path from Your Computer to a Remote Device Restoring the Default Configuration and Password Problems with Date and TimeRP614v4 Cable/DSL Router Reference Manual Appendix a Technical Specifications Factory Default SettingsGeneral Specifications Electromagnetic EmissionsAppendix B Related Documents Document LinkRP614v4 Cable/DSL Router Reference Manual Index Index-2

RP614 v4 specifications

The NETGEAR RP614 v4 is a versatile and reliable router known for its excellent performance in both home and small office environments. Designed to cater to the growing demands of internet connectivity, it combines reliable hardware with user-friendly features. This router supports the 802.11b and 802.11g Wi-Fi standards, enabling it to deliver high-speed wireless internet access to multiple devices simultaneously.

One of the main features of the RP614 v4 is its 4-port 10/100 Mbps Ethernet switch, which allows users to connect several Ethernet-enabled devices directly, such as computers, printers, and gaming consoles. This facilitates a stable and fast wired connection, ideal for bandwidth-intensive tasks like online gaming or video streaming. Additionally, the router supports NAT (Network Address Translation), which efficiently manages multiple sessions of internet access while maintaining security.

Security is a priority for the NETGEAR RP614 v4, which includes robust features such as a built-in firewall that protects the internal network from external threats. The router also supports SPI (Stateful Packet Inspection) and VPN (Virtual Private Network) pass-through, ensuring that users maintain a secure connection while accessing sensitive data remotely. Furthermore, it offers wireless security protocols such as WEP (Wired Equivalent Privacy) and WPA-PSK/WPA2-PSK, enabling users to encrypt their wireless connections effectively.

Ease of use is another significant advantage of the RP614 v4. The installation process is straightforward, thanks to a user-friendly web interface that guides users through the setup without requiring advanced technical skills. Additionally, the router's intuitive layout allows for easy navigation and customization of various settings, making it accessible for novice users while still offering options for more experienced users.

In terms of design, the NETGEAR RP614 v4 is compact and lightweight, allowing it to fit seamlessly into any workspace. With a combination of functionality, security, and user-friendliness, the NETGEAR RP614 v4 stands out as an excellent choice for anyone looking to enhance their internet connectivity experience in a home or small office environment. Its blend of performance and features makes it a reliable companion for anyone seeking solid networking solutions.
Top Page Image Contents