NETGEAR MBM621 user manual Power On the Modem and Computer

Page 15

Mobile Broadband Modem MBM621 User Manual

4.Connect the Ethernet cable that came with your modem to an Ethernet local area network (LAN) port on your computer. and to the Ethernet port on the modem.

Figure 1-5

Power On the Modem and Computer

Follow these steps:

1. Plug in the power adapter to your modem.

Figure 1-6

Installation

1-5

v1.0, November 2007

Image 15

Contents NETGEAR, Inc Mobile Broadband Modem MBM621 User ManualTrademarks Product and Publication Details V1.0, November Contents Appendix B Related Documents Conventions, Formats and Scope About This ManualHow to Print this Manual How to Use This ManualPrinting the Full Manual V1.0, November Installation Package ContentsRequirements Understanding the LEDs Front ViewModem Label Rear ViewInstall the SIM Card and Connect the Modem to a Computer InstallationPower On the Modem and Computer V1.0, November Log In to the Modem and Connect to the Internet Access in Appendix BBroadband Settings Settings and Maintenance Basic SettingsSetting Description Maintenance Modem Status Settings and StatisticsDhcp Attached DevicesBacking Up the Configuration to a File Backup SettingsErasing the Configuration Using the Reset ButtonUpgrading the Modem Firmware Setting the PasswordV1.0, September Port Forwarding Advanced SettingsConsiderations for Port Forwarding Setting Up Port ForwardingWAN Setup Setting Up Port TriggeringPort Triggering Setting Up a Default DMZ Server LAN IP Setup Settings Description Setting up the Modem as a Dhcp ServerReserved IP Addresses Static Routes Remote Management Http//134.177.0.1238080 Technical Specifications Local Network LAN Factory Default SettingsFeature Default Behavior Login Broadband SettingsDocument Link Appendix B Related DocumentsV1.0, September