NETGEAR MBM621 user manual V1.0, November

Page 16

Mobile Broadband Modem MBM621 User Manual

2.Verify the following:

The Power light is lit after applying power to the modem.

The Status light comes on briefly and then goes off.

The Internet light comes on.

For more information about LEDs, see “Understanding the LEDs” on page 1-2.

3.Attach the feet to the modem, and adjust the antenna so that it is pointed up at a 90 degree angle for best performance.

Figure 1-7

4.Turn on your computer, let the operating system boot up, and log in as needed.

The Ethernet (LAN) light on the modem lights up.

1-6

Installation

v1.0, November 2007

Image 16
Contents Mobile Broadband Modem MBM621 User Manual NETGEAR, IncTrademarks Product and Publication Details V1.0, November Contents Appendix B Related Documents About This Manual Conventions, Formats and ScopeHow to Use This Manual How to Print this ManualPrinting the Full Manual V1.0, November Package Contents InstallationRequirements Front View Understanding the LEDsRear View Modem LabelInstallation Install the SIM Card and Connect the Modem to a ComputerPower On the Modem and Computer V1.0, November Access in Appendix B Log In to the Modem and Connect to the InternetBroadband Settings Basic Settings Settings and MaintenanceSetting Description Maintenance Settings and Statistics Modem StatusAttached Devices DhcpBackup Settings Backing Up the Configuration to a FileUsing the Reset Button Erasing the ConfigurationSetting the Password Upgrading the Modem FirmwareV1.0, September Advanced Settings Port ForwardingSetting Up Port Forwarding Considerations for Port ForwardingSetting Up Port Triggering WAN SetupPort Triggering Setting Up a Default DMZ Server LAN IP Setup Setting up the Modem as a Dhcp Server Settings DescriptionReserved IP Addresses Static Routes Remote Management Http//134.177.0.1238080 Technical Specifications Factory Default Settings Feature Default Behavior LoginBroadband Settings Local Network LANAppendix B Related Documents Document LinkV1.0, September