Using the Configuration Menu (continued)
Home > WAN > PPPoE
Pleasebesure to remove any existing PPPoE client software installed on
your computers.
Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection . Your ISP will provide you with a username and password. This option is typically used for DSL services. Select Dynamic PPPoE to obtain an IP address automatically for your PPPoE connection. Select Static PPPoE to use a static IP address for your PPPoeE connection.
PPPoE- | Choose this option if your ISP uses PPPoE. (Most DSL users |
| will select this option.) |
| Dynamic PPPoE- receive an IPAddress automatically from your ISP. |
| Static |
User Name- | Your PPPoE username provided by your ISP. |
Retype Password- | |
Service Name- | Enter the Service Name provided by your ISP (optional). |
IP Address- | This option is only available for Static PPPoE. Enter the static |
| IP Address for the PPPoE connection. |
Primary DNS | Primary DNS IP address provided by our ISP |
Address- |
|
Secondary DNS | This option is only available for Static PPPoE. Enter the static |
Address- | IP Address for the PPPoE connection. |
(Continued on the next page) | 16 |