D-Link DI-804V manual This string is used as key authentication

Page 16

Incoming SPI

Enter the Incoming SPI that the remote VPN Gateway will use to identify this SA.

Outgoing SPI

Enter the Outgoing SPI that the local VPN Gateway will use identify this SA

Encryption Protocol

VPN Internet Gateway supports three encryption algorithms (Null, DES, or 3DES); user can select an appropriate encryption algorithm.

Encryption Key

This string is used as a key to encrypt and decrypt the data transmitted.

Authentication Protocol

VPN Internet Gateway supports two authentication algorithms (MD5 or SHA-1); user can select an appropriate authentication algorithm.

Authentication Key

This string is used as key authentication.

16

Image 16
Contents Link DI-804V Contents Package Contents Introduction WAN Power 5V DC Connect the DC power adapter to the Power port Firewall Protection IP Address Settings and Computer Settings Static IP settings for the PCUsing the Configuration Utility Basic Setup Click Basic SetupTime Settings Device IP SettingsCable/DSL ISP Settings ISP Additional Settings PPPoE Settings Modem Settings VPN Settings This string is used as key authentication Save & Restart Device Information Device Status Advanced Settings Dhcp Server SettingsVirtual Server Settings Static Routing Dynamic RoutingFilter Settings LAN Filter Settings Filter Settings WAN Filter Settings Modem String Settings Administration SettingsSystem Administration System Parameters Save & Restart Intruder Detection Log System ToolsDisplay Routing Table System Diagnostics Save Settings Load Settings Load Default Settings Load Settings Load Settings From FileUpgrade Firmware Reset DeviceConfiguring Your PCs to Connect To the DI-804V Router Confirm Your PC’S IP Configuration Ipconfig for Windows 2000/NT/XP Networking Basics Page Page Page Page Page Page Computer Select Properties Computer name Control Panel Connections Page Contacting Technical Support Limited Warranty Registration What You Must Do For Warranty ServiceWhat Is Not Covered