5.PPTP
Just follow steps below to configure the PPTP WAN type:
∙Set My IP Address as the IP address that the ISP assigned to your PC, e.g. 10.0.0.140.
∙Set My Subnet Mask as the mask that the ISP assigned to your PC, e.g. 255.255.255.0.
∙Set Server IP Address as the IP address of the DSL modem, e.g. 10.0.0.138.
∙Input the PPTP Account and Password.
∙Input the Connection ID if your ISP requires it.
∙Save the setting and restart the router.
∙In the Command prompt, type PING 4.0.0.1. If the reply is positive, the router and your PC have been successfully configured for PPTP WAN type.