43
Chapter 2: Connecting and Configuring Hardware
To install, remove, or replace measurement modules
4If you are inserting more than one module, the tightening order is
bottom module to top module. A single-module configuration can be
installed in any available slot.
5Some modules require calibration if they are moved to a different slot.
For calibration information, refer to the on-line help for the individual
modules.
WARNING: For correct air circulation, filler panels must be installed in a ll unused card
slots. Correct air circulation keeps the instrument from overheating. Keep
any extra filler panels for future use.
Insert
or filler panels.
module
s
(Other or
filler panels.)
modules
Remove filler panels.
(Other or
filler panels.)
modules