Agilent Technologies 16700B manual 16720A Pattern Generator 1-card module

Chapter 5: Installing Pattern Generator Measurement Modules

16720A Pattern Generator (1-card module)

16720A Pattern Generator (1-card module)

Each card shipped stand-alone has the 2 x 10 cable connected in the single- card module configuration. A single-card module can be installed in any available slot.

NOTE:	Turn off the mainframe power before removing, replacing, or installing
	modules following the procedures on page 42.
2x10 cable connection	2x10 cable
for a single-card
	Master

16720A Pattern Generator (2-card module)

Use two 2 x 10 cables to connect the modules.

NOTE:	Turn off the mainframe power before removing, replacing, or installing
	modules following the procedures on page 42.
	2x10 Cable
	Expander
	Master

92