Chapter 5: Installing Pattern Generator Measurement Modules
16720A Pattern Generator
16720A Pattern Generator (5-card module)
NOTE: | Turn off the mainframe power before removing, replacing, or installing |
modules following the procedures on page 42.
1Carefully slide the 4 cards half way into the mainframe slots.
2Use six 2 x 10 cables to connect the modules. Cable the bottom two Expander Cards to the Master Card first. Then cable the upper two Expanders to the Master Card.
2x10 Cable
Expander
Expander
Master |
Expander |
Expander |
3Gently slide the cabled assembly fully into the frame and tighten the thumb screws.
95
