Agilent Technologies 16700B manual 106

Chapter 6: Connecting Accessories

100-pin Single-ended Probe (E5378A for analyzers with 90-pin pod connectors)

	100-pinSingle-ended Probe (E5378A for analyzers with 90-pin pod
	connectors)
NOTE:	For use with Agilent logic analyzer modules 16760A, 16753A, 16754A,
	16755A, and 16756A.
	The Agilent E5378A is a 34-channel, single-ended, 100-pin probe capable of
	capturing data up to the rated maximum state (synchronous) analysis clock
	rates of all the supported analyzers, with signal amplitudes as small as 250 mV
	peak-to-peak. One E5378A probe is required for a 16760A module and two are
	required to support all the inputs on a 16753/54/55/56A module. A 100-pin
	connector must be installed on you target system board.

90-pin

Logic Analyzer

Pods

34-channel

Single-ended 100-pin Probe

Equivalent Load

150ohm

Signal
1.5pF	20k	0.7pF
	0.75V
Ground

Includes logic analyzer and 100-pin connector

Shroud

100-Pin Connector

106