Desa EVDDVF36STN High Altitude Installation, Parts Lists For Venting Kits And Components

OWNER’S MANUAL

VENTING

INSTALLATION

Continued

HIGH ALTITUDE

INSTALLATION

Your Vanguard direct-vent fireplace has been AGA tested and approved for eleva- tions from 0-2000 feet and CGA certified for elevations from 0-4500 feet.

When installing this fireplace at an elevation above 2000 feet (in the USA), you may need to decrease the input rating by changing the existing burner orifice to a smaller size. Re- duce input 4% for each 1000 feet above sea level. Check with your local gas company for proper orifice size identification.

When installing this fireplace at an eleva- tion above 4500 feet (in Canada), check with local authorities.

Consult your local gas company to help de- termine the proper orifice for your location.

For assistance with any high altitude instal- lation contact DESA International’s Tech- nical Service Department at 1-800-DESA- LOG (1-800-337-2564).

PARTS LISTS FOR VENTING KITS AND COMPONENTS

*NOTICE: The 7" x 30° Elbow sup- plied with kits CVK, BVK, SVK, and RVF cannot be used. It MUST be replaced with a 7" x 45º Starter Elbow (D2060).

Vanguard Rigid Venting

Number	Description
*CVK	Corner Vent Kit
	Includes: 7" x 30º Elbow, 7" x 90º
	Elbow, 7" Adjustable Galvanized
	Pipe (7-12"), 6" Pipe, Wall
	Thimble, Horizontal Termina-
	tion, RTV Silicone and 20 Screws
*BVK	Basement Rigid Vent Kit
	Includes: 7" x 30° Elbow, 7" x 4'
	Galvanized Pipe, 7" x 90° El-
	bow, 7" Adjustable Galvanized
	Pipe (7-12"), Wall Thimble,
	Horizontal Termination, RTV
	Silicone and 20 Screws

Vanguard Rigid Venting (Cont.)

Number Description

*SVK	Snorkel Rigid Vent Kit
	Includes: 7" x 30° Elbow, 7" x 4'
	Galvanized Pipe, 7" x 90° El-
	bow, 7" Adjustable Galvanized
	Pipe (7-12"), Wall Thimble, 36"
	Snorkel Termination, RTV Sili-
	cone and 28 Screws
*RVF	Roof Rigid Vent Kit
	Includes: Flue Restrictor, Storm
	Collar, 7" x 30° Elbow, 7" x 4'
	Galvanized Pipe, 7" x 2' Galva-
	nized Pipe, 7" Adjustable Gal-
	vanized Pipe (7-12"), Firestop
	Support, Roof Flashing, RTV
	Silicone, Vertical Termination,
	and 26 screws
D1000	7" x 12" Galvanized Coaxial
	Pipe (6 pcs.)
D1010	7" x 24" Galvanized Coaxial
	Pipe (6 pcs.)
D1020	7" x 48" Galvanized Coaxial
	Pipe (6 pcs.)
D1030	7" Adjustable (7-12")
	Galvanized Coaxial Pipe
	(6 pcs.)
D1050	7" x 6" Galvanized Coaxial
	Pipe (6 pcs.)
D2000	7" x 90° Elbow (6 pcs.)
D2010	7" x 45° Elbow (6 pcs.)
D2060	7" x 45° Starter Elbow
D3000	Wall Strap/Offset Support
	(6 pcs.)
D3010	Storm Collar (6 pcs.)
D3020	Wall Thimble (6 pcs.)
D3050	Vertical Restrictor (6 pcs.)
D3060	Ceiling Firestop/Support
	(6 pcs.)
D3070	Rectangular Horizontal Rigid
	Vent Termination Cap
D3071	Adjustable Horizontal Rigid
	Vent Termination Cap
D3090	Cathedral Ceiling Support
	Box
D4000	Roof Flashing 6/12-9/12
D4010	Roof Flashing 9/12-12/12
D4020	Flex Connector (6 pcs.)
D4030	Flex Wall Thimble (6 pcs.)
D4040	4" Hose Clamp (6 pcs.)
D4050	7" Hose Clamp (6 pcs.)
D5000	Vinyl Siding Standoff (6 pcs.)

Vanguard Flexible Venting

Number Description

FGFVK Flex Ground Floor Vent Kit

Includes: Flex Adapter, 7" x 4'

Flexible Pipe, 4" x 4' Flexible

Pipe, Wall Thimble, Horizontal

Termination, (4) Spacer Springs,

(2)4" Hose Clamps, (2) 7" Hose Clamps, RTV Silicone, and 10 Screws

D1040 7" x 25' Coaxial Flex Pipe

with Spacer Springs

D3080 Rectangular Horizontal

Flex Termination Cap

SIMPSON DURA-VENT GS 4" x 6 5/8 "

Number Description

9027" x 48" Pipe

9037" x 36" Pipe

9047" x 24" Pipe

9067" x 12" Pipe

9077" x 9" Pipe

9087" x 6" Pipe

9117" Adjustable (11"-14 5/8") Pipe

940Wall Thimble

941Cathedral Ceiling Support Box

943Roof Flashing 0/12-6/12

943S Roof Flashing 7/12-12/12

9457" x 45° Elbow

950Vinyl Siding Standoff

953Storm Collar

963Ceiling Firestop

98136" Snorkel Termination

984HorizontalTerminationVentCap

988Wall Strap

9907" x 90° Elbow

991Vertical High Wind Termination

106573 15