Agilent Technologies 16700B manual Would be effective for the current active session only

	Chapter 4: Installing Oscilloscope Measurement Modules
	16533/34A Oscilloscope Module (single or multi-card modules)
NOTE:	If you calibrate a module without unprotecting the memory, the new
	calibration settings will not be saved when the system is shut down. The
	system will default to the previous settings. The new calibration settings
	would be effective for the current active session only.

UNPROTECTED

PROTECTED

3Reinstall the 16533/34A modules and filler panels into the mainframe.

73