Product Regulations
EMC | This Product meets the requirements of the European |
| Communities (EC) EMC Directive 89/336/EEC. |
| Emissions EN55011/CISPR 11 (ISM, Group 1, Class A |
| equipment) |
| IEC |
| Immunity |
| IEC |
| IEC |
| IEC |
| Performance Codes1: |
Code1 1 1 1
|
| 1 Pass - Normal operation, no effect. |
|
| 2 Pass - Temporary degradation, self recoverable. |
|
| 3 Pass - Temporary degradation, operator |
|
| intervention required. |
|
| 4 Fail - Not recoverable, component damage. |
Safety | IEC | |
| UL 3111 |
|
| ||
Sound Pressure Level | N/A | |
Regulatory Information for Canada
ICES/NMB-001
This ISM device complies with Canadian
Cet appareil ISM est confomre à la norme
Regulatory Information for Australia/New Zealand
This ISM device complies with Australian/New Zealand AS/NZS 2064.1
Definitions: | Installation category (overvoltage category) I: Signal level, special equipment or |
| parts of equipment, telecommunication, electronic etc., with smaller transient |
| overvoltages than installation (overvoltage category) II. |
| Installation category (overvoltage category) II: Local level, appliances, portable |
| equipment etc., with smaller transient overvoltages than installation category III. |
Environmental | Indoor use only. |
Conditions | Altitude up to 3000 m. (10,000 ft.) |
Temperature | Instrument - 0 degrees C to 50 degrees C (32 degrees F to 122 degrees F) |
| Disk Media - 10 degrees C to 40 degrees C (50 degrees F to 104 degrees F |
| Probes/cables - 0 degrees C to 65 degrees C (32 degrees F to 149 degrees F) |
Humidity | Relative humidity 8 to 80% at 40 degrees C (104 degrees F) |
Power | (From host frame.) |
