Agilent Technologies 16700B manual 107

Chapter 6: Connecting Accessories

100-pin Differential Probe (E5379A for analyzers with 90-pin pod connectors)

	100-pin Differential Probe (E5379A for analyzers with 90-pin pod
	connectors)
NOTE:	For use with Agilent logic analyzer modules 16760A, 16753A, 16754A,
	16755A, and 16756A.
	The Agilent E5379A is a 17-channel, 100-pin differential probe capable of
	capturing data up to the rated maximum state (synchronous) analysis clock
	rates of all the supported analyzers, with differential signal amplitudes as
	small as 200 mV peak-to-peak (100 mV peak-to-peak on both positive and
	negative inputs). Two E5379A probes are required to support all the inputs on
	one 16760A. Four are required for one 16753/54/55/56A module. A 100-pin
	connector must be installed on your target system board.
	90-pin
	Logic Analyzer
	Pods

16-channel

Single-ended

100-pin Differential

Probe

Equivalent Load

150ohm

Signal
1.5pF	20k	0.7pF
	0.75V
Ground

Includes logic analyzer and 100-pin connector

Shroud

100-Pin Connector

107