94
Chapter 5: Installing Pattern Generator Measurement Modules
16720A Pattern Generator (4-card module)
16720A Pattern Generator (4-card module)NOTE: Turn off the mainframe power before removing, replacing, or installing
modules following the procedures on page 42 .
1Carefully slide the 4 cards half way into the mainframe slots.
2Use four 2 x 10 cables to connect the modules. Cable the bottom
Expander Card to the Master Card first. Then cable the upper two
Expander Cards to the Master Card.
3Gently slide the cabled assembly fully into the frame and tighten the
thumb screws.
Expander
Expander
Master
Expander
2x10
C
able