Agilent Technologies 16700B manual 111

Chapter 6: Connecting Accessories

Soft Touch Probes (E5387A and E5390A for analyzers with 90-pin pod connectors)

	Soft Touch Probes (E5387A and E5390A for analyzers with 90-pin pod
	connectors)
NOTE:	For use with Agilent logic analyzer modules 16760A, 16753A, 16754A,
	16755A, and 16756A.
	The new Agilent soft touch probes are ultra-low-load connector-less probes
	that attach to the PC board using a retention module which ensures pad-to-
	pad alignment and holds the probe in place. The E5387A is a 17-channel
	differential soft-touch probe and the E5390A is a 34-channel single-ended
	soft-touch probe. These probes will work with any future analyzers that use a
	90-pin connector on the cable where the probe attaches to the logic analyzer.

111