Agilent Technologies 16700B manual At the prompt

Chapter 7: Troubleshooting

To execute disaster recovery procedures

CD-ROM drive. The display will then show the boot devices:

Path Number	Device Path	Device Type
------------	------------	------------------
P0	SESCSI.6.0	IBM	DNES-309170W
P1	SESCSI.1.0	PLEXTOR	CD-ROM PX-40TS

7At the prompt:

Main Menu: Enter command >

Type: BO P1 <Enter>

8At the prompt:

Interact with IPL (Y, N, Q) ?> Type: N <Enter>

9After about 30 seconds you will see the message:

WARNING: The configuration information calls for a non- interactive installation.

Press <Return> within 10 seconds to cancel batch mode installation:

10To abort the reinstallation process at this point:

Press the [Return] key on the keyboard within 10 seconds. (If you do nothing within the 10 second time-out, the reinstallation process will begin. The instrument will completely reload the operating system software onto the hard disk drive.)

11Processor Support Packages, Auxiliary Software, and user files must be installed manually once the operating system has been reinstalled.

12Follow the steps on page 15 to reload system settings and license passwords.

116