Agilent Technologies 16700B manual IEC 61326-22002 / EN

Product Regulations

EMC	IEC 61326-2:2002 / EN 61326-1:1997	Performance Criteria[2]
	CISPR 11:1997+A1:1999 / EN 55011:1991 - Group 1 Class A
	IEC 61000-4-2:1995+A1:1998+A2:2000/EN 61000-4-2:1995 (ESD 4kV CD, 8kV AD)	A
	IEC 61000-4-3:1995+A1:1998+A2:2000/EN 61000-4-3:1995 (3V/m, 80-1000 MHz)	A
	IEC 61000-4-4:1995+A1:1998+A2:2001/EN 61000-4-4:1995 (EFT 0.5kV line-line, 1kV line-
		A
	earth)
		A
	IEC 61000-4-5:1995 / EN 61000-4-5:1995 (Surge 0.5 kV line-line, 1 kV line-earth)
		A
	IEC 61000-4-6:1996 / EN 61000-4-6:1996 (3V 80% AM power line)
		A
	IEC 61000-4-11:1994 / EN 61000-4-11:1994 (Dips 1 cycle, 100%)
	Canada: ICES-001:1998
	Australia/New Zealand: AS/NZS 2064.1
Safety	IEC 61010-1:1990+A1:1992+A2:1995 / EN 61010-1:1994+A2:1995
	Canada: CSA C22.2 No. 1010.1:1992
	USA: UL 3111-1:1994 (optional)

Additional Information

The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC (including 93/68/EEC) and carries the CE Marking accordingly (European Union).

[2]Performance Criteria:

APass - Normal operation, no effect.

BPass - Temporary degradation, self recoverable.

CPass - Temporary degradation, operator intervention required.

DFail - Not recoverable, component damage.

Sound Pressure Level Less than 60 dBA

Regulatory Information for Canada

ICES/NMB-001:1998

This ISM device complies with Canadian ICES-001.

Cet appareil ISM est confomre à la norme NMB-001 du Canada.

Regulatory Information for Australia/New Zealand

This ISM device complies with Australian/New Zealand AS/NZS 2064.1

Definitions:	Installation category (overvoltage category) I: Signal level, special equipment or parts of
	equipment, telecommunication, electronic etc., with smaller transient overvoltages than
	installation (overvoltage category) II.
	Installation category (overvoltage category) II: Local level, appliances, portable equipment
	etc., with smaller transient overvoltages than installation category III.
Environmental	Indoor use only.
Conditions	Altitude up to 3000 m. (10,000 ft.)
Temperature	Instrument - 0 degrees C to 50 degrees C (32 degrees F to 122 degrees F)
	Disk Media - 10 degrees C to 40 degrees C (50 degrees F to 104 degrees F
	Probes/cables - 0 degrees C to 65 degrees C (32 degrees F to 149 degrees F)
Humidity	Relative humidity 8 to 80% at 40 degrees C (104 degrees F)
Power	(From host frame.)