Agilent Technologies 16700B manual 108

Chapter 6: Connecting Accessories

38-pin Single-ended Probe (E5380A for analyzers with 90-pin pod connectors)

	38-pinSingle-ended Probe (E5380A for analyzers with 90-pin pod
	connectors)
NOTE:	For use with Agilent logic analyzer modules 16760A, 16753A, 16754A,
	16755A, and 16756A.
	The E5380A is a 34-channel, single ended, 38-pin probe designed to be
	compatible with the AMP MICTOR 38-pin connector. It is pin-compatible with
	target systems that were designed for the Agilent E5346A 38-pin probe, thus
	enabling you to use Agilent’s latest logic analyzers with target systems that
	were designed for older Agilent logic analyzers. The E5380A is capable of
	capturing state (synchronous) data at clock speeds up to 600 MHz, at data
	rates up to 600Mb/s, with with signal amplitudes as small as 300 mV peak-to-
	peak.

90-pin Logic Analyzer

Pods

				Amp “MICTOR 38”
				Connector Pinout
				(Top View)
	+5VDC		1	2	SCL
	GND DC		3	4	SDA
		CLK	5	6	CLK
		D15	7	8	D15
		D14	9	10	D14
	Pod	D13	11	12	D13
34-channel		D12	13	14	D12
		D11	15	16	D11
Single-ended 38-pin	Even	D10	17	18	D10
		D9	19	20	D9
		D6	25	26	D6
MICTOR-compatible		D8	21	22	D8
		D7	23	24	D7
Probe		D5	27	28	D5
		D4	29	30	D4
		D3	31	32	D3
		D2	33	34	D2
		D1	35	36	D1
		D0	37	38	D0

Equivalent Load

180ohm

Signal

Shroud	3pF	20k	0.7pF
Amp MICTOR 38		0.75V
	Ground
Connector
	Includes logic analyzer and MICTOR connector

Odd Pod

108