Agilent Technologies 16700B manual Equipment IEC 555-2 and IEC

Product Regulations

EMC	This Product meets the requirements of the European
	Communities (EC) EMC Directive 89/336/EEC.
	Emissions EN55011/CISPR 11 (ISM, Group 1, Class A
		equipment),
		IEC 555-2 and IEC 555-3	Code1
	Immunity	EN50082-1
		IEC 801-2 (ESD) 8kV AD	2
		IEC 801-3 (Rad.) 3V/m	1
		IEC 801-4 (EFT) 1kV	1
		Performance Codes1:
		1 Pass - Normal operation, no effect.
		2 Pass - Temporary degradation, self recoverable.
		3 Pass - Temporary degradation, operator intervention
		required.
		4 Fail - Not recoverable, component damage.
Safety	IEC 1010-1: 1990+A1 / EN 61010-1: 1993
	UL 3111
	CSA-C22.2 No.1010.1:1993
Sound Pressure Level		N/A

Regulatory Information for Canada

ICES/NMB-001

This ISM device complies with Canadian ICES-001.

Cet appareil ISM est confomre à la norme NMB-001 du Canada.

Regulatory Information for Australia/New Zealand

This ISM device complies with Australian/New Zealand AS/NZS 2064.1

Definitions:	Installation category (overvoltage category) I: Signal level, special equipment or
	parts of equipment, telecommunication, electronic etc., with smaller transient
	overvoltages than installation (overvoltage category) II.
	Installation category (overvoltage category) II: Local level, appliances, portable
	equipment etc., with smaller transient overvoltages than installation category III.
Environmental	Indoor use only.
Conditions	Altitude up to 3000 m. (10,000 ft.)
Temperature	Instrument - 0 degrees C to 50 degrees C (32 degrees F to 122 degrees F)
	Disk Media - 10 degrees C to 40 degrees C (50 degrees F to 104 degrees F
	Probes/cables - 0 degrees C to 65 degrees C (32 degrees F to 149 degrees F)
Humidity	Relative humidity 8 to 80% at 40 degrees C (104 degrees F)
Power	(From host frame.)