Chapter 5: Installing Pattern Generator Measurement Modules
16522A Pattern Generator
| 16522A Pattern Generator |
|
|
NOTE: | Turn off the mainframe power before removing, replacing, or installing |
| modules following the procedures on page 42. |
|
|
1Carefully slide the 4 cards half way into the mainframe slots.
2Use four 2 x 10 cables to connect the modules. Cable the bottom Expander Card to the Master Card first. Then cable the upper two Expander Cards to the Master Card.
2x10 Cable
Expander
Expander
Master
Expander
3Gently slide the cabled assembly fully into the frame and tighten the thumb screws.
90
