21
Chapter 2: Connecting and Configuring Hardware
To configure an optional monitor for the 16702B
To configure an optional monitor for the 16702B
The internal LCD display is pre-configured for 800 x 600 at the factory. Use
this procedure if you wish to configure an exte rnal monitor or change the
monitor setting to a different resolution.
1Connect your monitor to the logic analysis system as shown on page 18.
2Turn on power to the monitor and then to the logic analysis system.
3Immediately press the TAB key. Press once per second for
approximately 30 seconds. The display will change on the screen every
few seconds as the system cycles through the monitor resolution
choices.
12