D-Link DI-804 user manual Safety Precautions, Side Panel, Front Panel, Rear Panel

Safety Precautions

§Please read the installation guide thoroughly before you install the DI- 804.

§The DI-804 should only be repaired by authorized and qualified personnel.

§Please do not try to open or repair the DI-804 yourself.

§Do not place the DI-804 in a damp or humid location, i.e. a bathroom.

§The DI-804 should be placed in a sheltered and non-slip location within a temperature range of +5 to +40 Celsius degree.

§Please keep the wrap bag of the DI-804 and the clip binding the cable out of reach of children and babies to avoid choking.

§Please do not expose the DI-804 to direct sunlight or other heat sources. The housing and electronic components may be damaged by direct sunlight or heat sources.

Side Panel

The power port is located on the right-hand side of the DI-804. Connect the AC adapter to this port to supply power.

Front Panel

The front panel provides LED’s for device status. Refer to the following table for the meaning of each feature.

Power	Power status of the DI-804. A steady LED indicates that the
	power is on. No LED light indicates lack of power.
WAN	Wide Area Network status. When connected to the Internet,
	the WAN LED should be on.
Console	Indicates console port status.
LAN	Link/ACT = Displays Link Activity.
1,2,3,4	100/10 = Displays connection speed for each port. A steady
	LED indicates a speed of 100.

Rear Panel

The rear panel features a LAN port, WAN port, Console port and

11