D-Link dap-1320 user manual Wi-Fi Settings, Mode

Section 3 - Web-based Configuration

Wi-Fi Settings

This page lets you configure the Wi-Fi settings to connect your DAP-1320 to another wireless network. This is the uplink network which the DAP-1320 will then be able to extend. To access this page, click on the Settings drop-down menu at the top of the page, and select Wi-Fi.

Wireless This is set to Repeater mode and cannot be changed.

Mode:

Wi-Fi Network Click Scan to scan for available wireless networks and select

Name (SSID): the one you want to use the DAP-1320 to extend.

You can also type in the name (SSID) of the wireless network.

Security: Select the security method that is being used by the wireless network that you have selected: WEP, WPA/WPA2, or None.

Password: If you selected WEP or WPA/WPA2, you will be required to enter the password or security key for the network you are attempting to join.

You can also use WPS to connect your wireless devices to the DAP-1320’s extended network. For further information on how to do this, please refer to “Connecting a Wireless Client” on page 31.

Click Save to save the settings and return to the home page.

D-Link DAP-1320 User Manual 22