Using the Configuration Menu (continued)
Advanced > SNMP
SNMP (Simple Network Management Protocol) is a widely used network monitoring and control protocol that reports activity on each network device to the administrator of the network. SNMP can be used to monitor traffic and statistics of the
Enabled or Disabled:
Click Enabled to enable SNMP. Click Disabled to
Local:
SNMP services will be available on the Local (LAN) network.
Remote:
SNMP services will be available on the remote (WAN) network.
Get Community:
“Read only” access for network administration using SNMP. You can view the network, but no configuration is possible with this setting.
Set Community:
“Read and Write” access for network administration using SNMP. The administrator can configure the network with this setting.
43