D-Link Di-524 manual Advanced Filters IP Filters, Port

Using the Configuration Menu (continued)

Advanced > Filters > IP Filters

Filters are used to deny or allow LAN (Local Area Network) computers from accessing the Internet. The DI-524 can be setup to deny internal computers by their IP or MAC addresses. The DI-524 can also block users from accessing restricted web sites.

IP Filters-	Use IP Filters to deny LAN IP addresses from accessing the
	Internet. You can deny specific port numbers or all ports for
	the specific IP address.
IP-	The IP address of the LAN computer that will be denied
	access to the Internet.
Port-	The single port or port range that will be denied access to the
	Internet.
Protocol Type-	Select the protocol type.
Schedule-	This is the schedule of time when the IP Filter will be enabled.

23