Frequently Asked Questions (continued)
What are virtual servers?
A Virtual Server is defined as a service port, and all requests to this port will be redirected to the computer specified by the server IP. For example, if you have an FTP Server (port 21) at 192.168.0.5, a Web server (port 80) at 192.168.0.6, and a VPN server at 192.168.0.7, then you need to specify the following virtual server mapping table:
Server Port
21
80
1723
Server IP
192.168.0.5
192.168.0.6
192.168.0.7
Enable
X
X
X
How do I use PC Anywhere with my DI-524 router?
You will need to open 3 ports in the Virtual Server section of your
Step 1 Open your web browser and enter the IP Address of the router (192.168.0.1).
Step 2 Click on Advanced at the top and then click Virtual Server on the left side.
Step 3 Enter the information as seen below. The Private IP is the IP Address of the computer on your local network that you want to connect to.
Step 4 The first entry will read as shown here:
Step 5 Click Apply |
|
and then click Continue. | 80 |
|