D-Link BEFCMU10 manual For Windows 95, 98, or Millennium users, Renewing Your PC’s IP Address

Page 14

Instant BroadbandTM Series

Renewing Your PC’s IP Address

Occsionally, your PC may fail to renew its IP address, which will keep it from connecting to your Cable Internet Service Provider. When this happens, you will not be able to access the Internet through your Cable Modem. This is fair- ly normal, and does not indicate a problem with your hardware. The procedure to correct this situation is simple. Follow these steps to renew your PC’s IP address:

For Windows 95, 98, or Millennium users:

1.From your Windows 95, 98, or Millennium desktop, click the Start button, point to Run, and click to open the Run window.

EtherFast® Cable Modem with USB and Ethernet Connection

2.Enter winipcfg in the Open field. Click the OK button to execute the pro- gram. The next window to appear will be the IP Configuration window.

3.Select the Ethernet adapter to show the IP address. Press Release and then press Renew to get a new IP address from your ISP's server.

4.Select the OK to close the IP Configuration window. Try your Internet con- nection again after this process.

22

23

Image 14
Contents EtherFast Cable Modem UG-BEFCM10-10802NC DG Table of Contents IntroductionOverview Package ContentsSystem Requirements Rear Panel USB Cable IconFront Panel Connecting the Cable Modem with USB to Your PCConnecting Using the Ethernet Port Connecting Using the USB Port Installing the USB Driver for WindowsInstant BroadbandTM Series Installing the USB Driver for Windows Millennium Installing the USB Driver for Windows On Connecting Using the USB Port to finish the set up Troubleshooting Common Problems and SolutionsInstalling the TCP/IP Protocol AppendixFor Windows 95, 98, or Millennium users Renewing Your PC’s IP AddressSpecificationspecifications EnvironmentalWarranty Information Contact InformationCopyright 2001 Linksys, All Rights Reserved