D-Link DI-206 manual Layer 2 Filter

DI-206 ISDN Remote Router

Each decision on handling packets is described below:

1.Disable – Will not apply a filter.

2.Forward – This allows the routing of a packet, even though it has not met the criteria of the corresponding filter.

3.Drop – This drops (doesn’t allow routing for) a packet that has not met the criteria for the corresponding filter.

Layer 2 Filter

The Layer 2 Filter sub-menu contains a protocol independent (data-link layer) filter. Foreknowledge of the specific protocol used on the interface (LAN or WANs) is needed to make effective use of this filter.

Select an entry above and then press <Enter>. The following screen appears:

44