Linksys WET54GS5 manual Wireless Settings

Page 21

Wireless-G Ethernet Bridge with 5-Port Switch

7.The Wireless Settings screen, shown in Figure 5-6, will now appear. Enter your wireless network’s SSID. If you chose Ad-Hoc mode, select the channel at which the network broadcasts its wireless signal.

If you have Wireless-G (802.11g) and Wireless-B (802.11b) devices in your network, then keep the default Network Mode setting, Mixed. If you have only Wireless-G devices, select G-Only. Then click the Next button to continue or the Back button to return to the previous screen.

SSID - The SSID is the unique name shared among all devices in a wireless network. The SSID must be identical for all devices in the wireless network. It is case-sensitive and must not exceed 32 alphanumeric characters, which can be any keyboard character.

Channel - From the drop-down menu, select the appropriate channel to match your network settings (available for Ad-Hoc mode only). All devices in your wireless network must use the same channel in order to communicate.

Network Mode - Keep the default setting, Mixed, if you have Wireless-G and Wireless-B devices in your network. Select G-Only if you have only Wireless-G devices in your network.

8.The IP Settings screen will appear next, shown in Figure 5-7. If your network has a DHCP server, click the radio button next to Automatically obtain an IP address (DHCP). Click the Next button to continue or the Back button to return to the previous screen. Then proceed to step 9. The Bridge’s default IP address is 192.168.1.116.

If your network does not have a DHCP server, click the radio button next to Set IP configuration manually to select this option. Enter an IP Address, IP Mask, and Gateway appropriate to your network. You must specify an IP address on this screen. If you are unsure about the IP Mask and Gateway, it is better to leave these two fields blank. Click the Next button to continue or the Back button to return to the previous screen. Then proceed to step 9.

IP Address - This IP address must be unique to your network.

IP Mask - The Bridge’s IP Mask (also known as Subnet Mask) must be the same as your wired network’s Subnet Mask.

Gateway - Enter the IP address of your network’s Gateway (usually this is your router’s LAN IP address).

Figure 5-6: Wireless Settings

Figure 5-7: IP Settings

Chapter 5: Setting Up the Wireless-G Ethernet Bridge

15

Image 21
Contents Wireless- G Copyright and Trademarks How to Use this GuideTable of Contents FCC Statement Industry Canada Canada Appendix I Contact InformationInfrastructure Network List of Figures10 WPA RADIUS-TTLS Introduction What’s in this Guide? Wireless-G Ethernet Bridge with 5-Port Switch Planning Your Wireless Network Ad-Hoc versus Infrastructure ModeNetwork Topology Ad-Hoc Network Network LayoutBack Panel Front Panel Side Panel Power port is on the side panel. See Figure Connecting the Wireless-G Ethernet Bridge for Setup Wireless-G Ethernet Bridge with 5-Port Switch Welcome Setting Up the Wireless-G Ethernet BridgePassword Mode Settings Wireless Settings Security Settings 10 Confirmation Connecting the Wireless-G Ethernet Bridge for Network Use Wall Mount Placement OptionConnection to a Network Device Using the Wireless-G Ethernet Bridge Web-based Utility OverviewStarting the Web-based Utility LAN SetupSite Survey WEP Radius TLS Ttls WPA Radius 10 WPA RADIUS-TTLS 11 WPA Pre-Shared Key 13 Password Tab Wireless Advanced WirelessMAC Address Spanning Tree Protocol Switch TabQOS 17 Switch Table Tab Switch TableVlan Wireless-G Ethernet Bridge with 5-Port Switch 19 Rmon Statistics Tab Rmon StatisticsWireless-G Ethernet Bridge with 5-Port Switch Port Information Table Port Mirroring21 Access List Tab Access ListLAN Settings Wireless StatusWireless Settings StatisticsSnmp 24 Help Tab HelpCommon Problems and Solutions Appendix a TroubleshootingWeb-based Utility won’t open Frequently Asked QuestionsWhat is ad-hoc mode? What is ISM band? Appendix B Wireless Security Security PrecautionsSecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G Ethernet Bridge with 5-Port Switch Appendix C Upgrading Firmware Figure C-1 Firmware UpgradeAppendix D Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Appendix E Glossary Wireless-G Ethernet Bridge with 5-Port Switch Wireless-G Ethernet Bridge with 5-Port Switch Wireless-G Ethernet Bridge with 5-Port Switch Wireless-G Ethernet Bridge with 5-Port Switch Wireless-G Ethernet Bridge with 5-Port Switch Wireless-G Ethernet Bridge with 5-Port Switch Security Feature Appendix F SpecificationsModel StandardsOperating Temp Warranty Year Limited WarrantyStorage Temp Operating HumidityLimited Warranty Appendix G Warranty InformationFCC Statement Appendix H Regulatory InformationIndustry Canada Canada FCC Radiation Exposure StatementAppendix I Contact Information