Wireless-G Ethernet Bridge with 5-Port Switch
4.The
•Check that the
•Make sure that the SSID and network mode are the same for all devices connected to the same wireless network.
•If the wireless LAN settings are okay, make sure that all the devices are on the same IP network.
5.The Web-based Utility won’t open.
Make sure you correctly entered the Bridge’s IP address in the Address field of your web browser. If you are not sure what the Bridge’s IP address is, then run the Setup Wizard. Follow the
6.The Web-based Utility does not recognize my password.
The password is
7.After I make changes through the
Frequently Asked Questions
What is the IEEE 802.11g standard?
It is one of the IEEE standards for wireless networks. The 802.11g standard allows wireless networking hardware from different manufacturers to communicate, provided that the hardware complies with the 802.11g standard. The 802.11g standard states a maximum data transfer rate of 54Mbps and an operating frequency of 2.4GHz. It is backward compatible with 802.11b devices.
What is the IEEE 802.11b standard?
It is one of the IEEE standards for wireless networks. The 802.11b standard allows wireless networking hardware from different manufacturers to communicate, provided that the hardware complies with the 802.11b standard. The 802.11b standard states a maximum data transfer rate of 11Mbps and an operating frequency of 2.4GHz.
Appendix A: Troubleshooting | 44 |
Frequently Asked Questions