Chapter 3
Advanced Configuration
Security Mode > RADIUS
IMPORTANT: If you are using WEP encryption, always remember that each device in your wireless network MUST use the same WEP encryption method and encryption key, or else your wireless network will not function properly.
RADIUS Server Enter the IP address of the RADIUS server.
RADIUS Port Enter the port number of the RADIUS server. The default is 1812.
Shared Secret Enter the key shared between the Router and the server.
Encryption Select a level of WEP encryption, 40/64 bits (10 hex digits) or 104/128 bits (26 hex digits). The default is 40/64 bits (10 hex digits).
Passphrase Enter a Passphrase to automatically generate WEP keys. Then click Generate.
Key
TX Key Select which TX (Transmit) Key to use. The default is 1.
WEP
WEP is a basic encryption method, which is not as secure as WPA.
Security Mode > WEP
Encryption Select a level of WEP encryption, 40/64 bits (10 hex digits) or 104/128 bits (26 hex digits). The default is 40/64 bits (10 hex digits).
Passphrase Enter a Passphrase to automatically generate WEP keys. Then click Generate.
Key
TX Key Select which TX (Transmit) Key to use. The default is 1.
Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes.
Wireless > Wireless MAC Filter
Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network’s radius.
17 |