Linksys WAG200G manual Applications and Gaming Single Port Forwarding

Chapter 4

Advanced Configuration

Summary

Status  Policies are disabled by default. To enable a policy, select its number from the drop-down menu, and select Enable.

To create a policy, follow steps 1-10. Repeat these steps to create additional policies, one at a time.

1.Select a number from the Internet Access Policy drop- down menu.

2.To enable this policy, select Enable.

3.Enter a Policy Name in the field provided.

4.Click Edit List of PCs to select which computers will be affected by the policy. The Internet Access PC List screen appears. You can select a computer by MAC address or IP address. You can also enter a range of IP addresses if you want this policy to affect a group of computers. After making your changes, click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Then click Close.

Internet Access Computer List

5.Specify the Access Restriction to apply to the computers you selected in step 4. Select Deny to block Internet access, or Allow to allow Internet access.

6.Specify when this policy will be in effect. Select the days: individual days of the week, or Everyday. Then select the time span within each day: specific start and end times using the From and To fields, or 24 Hours.

7.To block websites by URL address, enter each URL in a separate Website Blocking by URL Address field.

8.To block websites using keywords, enter each keyword in a separate Website Blocking by Keyword field.

9.You can filter access to various services accessed over the Internet, such as FTP or telnet. From the Blocked Services list, select the service you want to block; the port numbers and protocol for the selected service are automatically displayed.

If the service you want is not listed, then add it; enter its port numbers in the fields provided; then select its protocol: ICMP, TCP, UDP, or TCP & UDP from the drop-down menu. Then click Add.

Ifyouwanttomodifytheserviceyouadded,selectit,and them make your changes. Then click Modify.

If you want to delete a service you added, select it, and then click Delete.

When your changes have been made, click Save Settings.

Blocked Services List

10.Click Save Settings to save the policy’s settings. To cancel the policy’s settings, click Cancel Changes.

Applications and Gaming > Single Port Forwarding

The Single Port Forwarding screen allows you to customize port services for common applications.

Wireless-G ADSL Home Gateway 18