Installation, Connection, Setup | Linksys WAG200G specification

Chapter 3

Installation

Chapter 3: Installation

Linksys strongly recommends that you run the Setup CD- ROM. If you have problems running the Setup CD-ROM, use this chapter.

Connection

1.Make sure that all the devices that you are working with are powered down, including your computer(s) and the Gateway. If you have a modem connected to your network, disconnect it. The Gateway replaces your modem.

2.Connect one end of the provided Ethernet cable to your computer’s Ethernet adapter. Connect the other end of the Ethernet cable to one of the Ethernet ports on the back of the Gateway.

Connect the Computer

3.Repeat step 2 for every computer or device that you want to connect to the Gateway via Ethernet. If you connect more than four computers to the Gateway, you also need to connect a switch to the Gateway.

NOTE: If your computer’s Ethernet adapter is not set up, refer to the Ethernet adapter’s documentation for more information.

5.Connect one end of the phone cable to the DSL port on the back of the Gateway.

4.Connect the other end of the phone cable to the wall jack with ADSL service or microfilter.

Connect the DSL

NOTE: To avoid interference, you may need to place a microfilter or splitter between the phone cable and wall jack. Contact your ISP to determine if one is required. (UK residents need to connect the microfilter to the wall phone jack with ADSL service and then connect one end of the provided phone cable to the DSL port on it.) If you have more than one phone and you experience static on the line after installing the Gateway, then you need to install an additional microfilter for each phone or fax that you use. If you use ISDN, then you do not need a microfilter.

6.Connect the power adapter to the Gateway’s power port and the electrical outlet.

Connect the Power

7.Power on the computer that you want to use to configure the Gateway.

8.The Power, Wireless, and at least one of the numbered Ethernet (1, 2, 3, or 4) LEDs should light up. If not, make sure the Gateway is powered on and the cables are securely connected.

Connection is complete.

Continue to the “Setup” section.

Setup

For setup, configure the Gateway to access the Internet through your ADSL Internet Service Provider (ISP). Use the setup information provided by your ISP.

Continue to “Chapter 4: Advanced Configuration”, and complete the following sections:

•Setup > Basic Setup

•Wireless > Basic Wireless Settings

•Wireless > Wireless Security

After completing the setup, test the Gateway. Enter www.linksys.com/uk/registration in the web browser’s Address field, and press Enter.

Installation is complete.

Wireless-G ADSL Home Gateway

WAG200G specifications

The Linksys WAG200G is a versatile wireless router that caters to the needs of both home and small office users, delivering a seamless internet experience. This device combines ADSL modem functionality with a wireless router, making it an all-in-one solution for connectivity. The WAG200G supports ADSL and ADSL2+ standards, ensuring compatibility with a wide range of internet service providers and facilitating speeds of up to 24 Mbps downstream.

One of the standout features of the WAG200G is its integrated wireless technology. It utilizes the 802.11g standard, allowing users to enjoy wireless connectivity with speeds of up to 54 Mbps. This is particularly beneficial for streaming media, online gaming, and downloading large files. The router also supports backward compatibility with the 802.11b standard, making it suitable for older devices.

Security is a critical concern for any network, and the WAG200G addresses this with robust encryption protocols, including WEP, WPA, and WPA2. These security measures help protect the network from unauthorized access, ensuring that personal data and sensitive information remain secure.

In terms of connectivity options, the WAG200G features four Ethernet ports for wired connections, providing reliable access for stationary devices such as desktops and gaming consoles. The router's DHCP server automatically assigns IP addresses to connected devices, simplifying the setup process for users.

The user-friendly web-based interface allows for easy configuration and management of the router settings. Users can set up filtering rules, configure firewall settings, and manage bandwidth allocation with ease. Additionally, the device offers Quality of Service (QoS) features, enabling users to prioritize bandwidth for specific applications or devices, thereby optimizing performance during peak usage times.

Another notable characteristic of the WAG200G is its compact and stylish design, making it a suitable addition to any workspace or home environment. The device is equipped with LED indicators that provide visual feedback on connectivity status, power, and activity, allowing users to monitor their network at a glance.

In summary, the Linksys WAG200G is a reliable and feature-rich router that combines ADSL modem capabilities with robust wireless networking. Its blend of speed, security, and user-friendly design makes it an ideal choice for users seeking a comprehensive connectivity solution. Whether for casual browsing, media streaming, or business applications, the WAG200G stands out as a solid choice in the competitive router market.