Wireless-N Gigabit Gaming Router
The SETUP Tab - MAC ADDRESS CLONE
A MAC address is a
Mac Cloning
To use MAC address cloning, select Enable. Otherwise, keep the default, Disable.
MAC Address. Enter the MAC Address registered with your ISP.
ClonePC’s MAC Address. If you want to clone the MAC address of the PC you are currently using to configure the Router, then click this button. The Router will automatically detect your PC’s MAC address, so you do NOT have to call your ISP to change the registered MAC address to the Router’s MAC address. It is recommended that the PC registered with the ISP is used to open the MAC Address Clone screen.
When you have finished making changes to this screen, click SAVE SETTINGS to save the changes, or click
CANCEL CHANGES to clear all fields and start over.
Figure 5-9: SETUP Tab- MAC ADDRESS CLONE
mac address: the unique address that a manufacturer assigns to each networking device.
Chapter 5: Configuring the | 21 |
The SETUP Tab - MAC ADDRESS CLONE