Wireless-N Gigabit Gaming Router
The STATUS Tab - ROUTER
The ROUTER screen displays information about the Router and its current settings. The
Router Status
Firmware Version. This is the version number of the Router’s current firmware.
NAT. This shows whether the NAT is enabled or disabled.
Current Time. This shows the time set on the Router.
System Up Time. This displays the amount of time the system has been operating in this session.
Internet Connections
Connection Type. This indicates the type of Internet connection you are using.
Internet IP Address. The Router’s Internet IP address is displayed here.
Subnet Mask. The Router’s Subnet Mask for DHCP and static IP connections is displayed here.
Figure 5-34: STATUS Tab - ROUTER
Default Gateway. The Default Gateway address is displayed here for DHCP and static IP connections.
DNSIP Address. Shown here are the DNS (Domain Name System) IP addresses currently used by the Router.
MAC Address. This is the Router’s MAC address, as seen by your ISP.
Click the Renew button to replace the current IP address—of the device connected to the Router’s Internet port—with a new IP address. (Available for a DHCP connection).
Click the Release button to release the current IP address of the device connected to the Router’s Internet port. (Available for a DHCP connection.)
Click REFRESH to update the on-screen information.
Chapter 5: Configuring the | 47 |
The STATUS Tab - ROUTER