Linksys NWR04B manual To start over, I need to set the Router to factory default

Page 35

Network Everywhere® Series

9.I forgot my password, or the password prompt always appears when saving set- tings to the Router.

Reset the Router to factory default by pressing the Reset button for 30 seconds and then releasing it. If you are still getting prompted for a password when sav- ing settings, then perform the following steps:

A.Access the Router’s web interface by going to http://192.168.1.1 or the IP address of the Router. Enter the default password admin, and click the Password tab.

B.Enter a different password in the Router Password field, and enter this new password in the second field to confirm the password.

C.Click the Apply button.

10.I am a PPPoE user, and I need to remove the proxy settings or the dial-up pop- up window.

If you have proxy settings, you need to disable these on your computer. Because the Router is the gateway for the Internet connection, the computer does not need any proxy settings to gain access. Please follow these directions to verify that you do not have any proxy settings and that the browser you use is set to connect directly to the LAN.

For Microsoft Internet Explorer 5.0 or higher:

A.Click Start, Settings, and Control Panel. Double-clickInternet Options.

B.Click the Connections tab.

C.Click the LAN settings button and remove anything that is checked.

D.Click the OK button to go back to the previous screen.

E.Click the option Never dial a connection. This will remove any dial-up pop-ups for PPPoE users.

For Netscape 4.7 or higher:

A.Start Netscape Navigator, and click Edit, Preferences, Advanced, and Proxies.

B.Make sure you have Direct connection to the Internet selected on this screen.

C.Close all the windows to finish.

11. To start over, I need to set the Router to factory default.

Hold the Reset button for up to 30 seconds and then release it. This will return the password, forwarding, and other settings on the Router to the factory default settings. In other words, the Router will revert to its original factory configuration.

Wireless Cable/DSL Router

12. I need to upgrade the firmware.

In order to upgrade the firmware with the latest features, you need to go to the Network Everywhere website and download the latest firmware at www.net- workeverywhere.com. Follow these steps:

A. Go to the Linksys website at http://www.networkeverywhere.com and download the latest firmware.

B.To upgrade the firmware, follow the steps in the Help section found in “Chapter 6: The Router’s Web-based Utility.”

13. The firmware upgrade failed, and/or the Diag LED is flashing.

The upgrade could have failed for a number of reasons. Follow these steps to upgrade the firmware and/or make the Diag LED stop flashing:

A.If the firmware upgrade failed, use the TFTP program (it was downloaded along with the firmware). Open the pdf that was downloaded along with the firmware and TFTP program, and follow the pdf’s instructions.

B.Set a static IP address on the PC; refer to “Problem #1, I need to set a stat- ic IP address.” Use the following IP address settings for the computer you are using:

IP Address: 192.168.1.50

Subnet Mask: 255.255.255.0

Gateway: 192.168.1.1

C.Perform the upgrade using the TFTP program or the Router’s web-based utility through its Help tab.

14. My DSL service’s PPPoE is always disconnecting.

PPPoE is not actually a dedicated or always-on connection. The DSL ISP can disconnect the service after a period of inactivity, just like a normal phone dial- up connection to the Internet. There is a setup option to “keep alive” the con- nection. This may not always work, so you may need to re-establish connec- tion periodically.

A. To connect to the Router, go to the web browser, and enter http://192.168.1.1 or the IP address of the Router.

B.Enter the password, if asked. (The default password is admin.)

C.In the Setup tab, select the option Keep Alive, and set the Redial Period option at 20 (seconds).

D.Click the Apply button.

E.Click the Status tab, and click the Connect button.

63

64

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Page Copyright & Trademarks Table of Contents An Introduction to LANs and WANs Wireless Cable/DSL RouterFeatures IntroductionPorts 4, 3 PowerRouter’s Ports InternetRouter’s LEDs PowerConnecting the Router Planning Your Wireless NetworkOverview Configuring the PCsConfiguring Windows 98 SE and Millennium PCs Configuring Windows 2000 PCs Configuring Windows XP PCs Setup Wizard’s Title Screen Using the Setup WizardSetting Up the Router with a Cable Connection Preparing to Set UpChannel SsidSet Additional Setting Up the Router with a DSL ConnectionSsid Logging Router’s Web-based UtilitySetup Fixed IP Obtain an IP Address AutomaticallyPPPoE PasswordDhcp StatusHelp LogIP Filtering AdvancedNetwork Everywhere Series Forwarding UPnP ForwardingPort Range Forwarding Triggering PortStatic Routing Dynamic RoutingDMZ Host MAC Address Clone WirelessNetwork Everywhere Series For Windows XP Appendix a TroubleshootingCommon Problems and Solutions Need to set a static IP address on a PCFor Windows 98 SE and Me Want to test my Internet connectionNeed to set up a server behind my Router Am not able to access the Router’s web interface SetupCan’t get the Internet game, server, or application to work TCP UDPMy DSL service’s PPPoE is always disconnecting To start over, I need to set the Router to factory defaultNeed to upgrade the firmware Firmware upgrade failed, and/or the Diag LED is flashingFull/Col LED keeps flickering continuously Click the Advanced = Filter tabNeed to use port triggering Diag LED stays lit continuouslyFrequently Asked Questions Allows Pptp packets to pass through Network Everywhere Series Step Two Pinging for a Web Address Appendix B How to Ping Your ISP’s E-mail and Web AddressesStep One Pinging an IP Address Appendix C Configuring Wireless Security Figure C-2 Figure C-3 Configuring Wireless Security in Windows XPFigure C-6 Figure C-10 For Windows 2000 and XP Figure D-3Figure D-6 Appendix E GlossaryNetwork Everywhere Series Network Everywhere Series Network Everywhere Series Network Everywhere Series Environmental Appendix F SpecificationsAppendix G Warranty Information TX16 dBm 40mW. RX 11Mbps -78dBmCopyright 2002 Network Everywhere. All rights reserved Appendix H Contact InformationTechnical Support Fax Web site

NWR04B specifications

The Linksys NWR04B is a versatile and robust wireless router designed to cater to both home and small office environments. Known for its reliable performance and ease of use, this router is equipped with a range of features that ensure stable connectivity and enhanced productivity.

One of the standout characteristics of the NWR04B is its wireless technology. Utilizing the 802.11n standard, it offers fast data transfer rates, significantly reducing latency and buffering issues. The router supports both 2.4GHz and 5GHz frequency bands, allowing users to choose the optimal band for their specific networking needs. The dual-band feature not only enhances the speed of the network but also provides a stable connection, minimizing interference from other devices.

The Linksys NWR04B is designed with security in mind. It integrates advanced security protocols such as WPA2 encryption, ensuring that users' data remains safe from unauthorized access. The built-in firewall adds another layer of protection, safeguarding the internal network from potential threats. This is particularly important in today’s digital landscape, where cybersecurity is a significant concern.

In terms of connectivity, the NWR04B comes with multiple Ethernet ports, enabling wired connections for devices that require a more stable and secure connection than wireless offers. This is ideal for gaming consoles, PCs, and network-attached storage devices. Moreover, the router supports Quality of Service (QoS) settings, allowing users to prioritize bandwidth for specific applications, such as video streaming or online gaming. This ensures a smoother and more reliable experience for high-bandwidth activities.

Another notable feature is its easy setup process. The Linksys NWR04B includes an intuitive web-based interface that guides users through the initial configuration without extensive technical knowledge. Additionally, it supports various connectivity options, including DHCP, Static IP, and PPPoE, catering to diverse internet service providers.

Overall, the Linksys NWR04B presents a well-rounded solution for anyone looking to upgrade their home or small office network. With its reliable dual-band performance, robust security features, and user-friendly setup, it stands out as an excellent choice for both tech-savvy users and novices alike. Whether streaming high-definition content, participating in video calls, or engaging in online gaming, the NWR04B delivers a seamless Internet experience, making it a valuable asset in any digital setup.
Top Page Image Contents