Linksys RT042 manual Back and Side Panels, Reset Button, Ports

Page 13

Broadband Router

The Back and Side Panels

The Router’s ports and Reset button are located on the back panel of the Router.

Ethernet

Internet1

Internet2

Figure 3-2: Back Panel

Reset Button

Reset Button The Reset button can be used in one of two ways:

If the Router is having problems connecting to the Internet, press the Reset button for just a second with a paper clip or a pencil tip. This is similar to pressing the Reset button on your PC to reboot it.

If you are experiencing extreme problems with the Router and have tried all other troubleshooting measures, press and hold in the Reset button for 30 seconds. This will restore the factory defaults and clear all of the Router’s settings, such as port forwarding or a new password.

Ports

Ethernet 1-4 These four Ethernet ports connect to network devices, such as PCs, print servers, or additional switches.

Internet1 The Internet1 port connects to a cable or DSL modem.

Internet2 The Internet2 port acts as an additional Internet port and connects to a cable or DSL modem.

Power

The Power port is where you will connect the included AC power cable.

Proceed to “Chapter 4: Connecting the Broadband Router.”

Chapter 3: Getting to Know the Broadband Router

boot: to start a device and cause it to start executing instructions.

7

The Back and Side Panels

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Broadband Router Copyright and Trademarks How to Use this GuideWord definition Table of Contents Appendix D Using the RT042 Utility Appendix a TroubleshootingCommon Problems and Solutions Frequently Asked Questions Appendix B Upgrading FirmwareAdd/Edit New Applications List of Figures22 Service Management Welcome IntroductionFirmware the programming code that runs a networking device What’s in this Guide?Introduction What’s in this Guide? An Introduction to LANs Networking BasicsUse of IP Addresses Packet a unit of data sent over a networkUse of IP Addresses LEDs Getting to Know the Broadband RouterBack and Side Panels Reset ButtonPorts Overview Connecting the Broadband RouterConnect a PC Connection InstructionsSystem Summary Tab Setting Up and Configuring the Broadband RouterDomain a specific name for a network of computers Advanced Setup TabSystem Information How to Access the Web-based UtilityUser Usage ISP Bandwidth User BandwidthInternet Connection Type LAN SettingPptp Point-to-Point Tunneling Protocol Basic Setup Tab PasswordBasic Setup Tab MAC Clone Basic Setup Tab TimeTime Parental Control Tab Website Hit Rate Parental Control Tab On-Line SchedulerParental Control Tab Performance Optimization Parental Control Tab Application UsageAdding/Editing New Applications 19 Parental Control Tab Block List Parental Control Tab Block ListAdvanced Setup Tab Forwarding Advanced Setup Tab DMZ HostPort Range Forwarding Port Triggering Advanced Setup Tab UPnPAdvanced Setup Tab Advanced Routing Advanced Setup Tab DdnsDynamic Routing Enter the following data to create a static route entry Static RoutingAdvanced Setup Tab Remote Management Advanced Setup Tab VPN Pass ThroughDiagnostics Advanced Setup Tab System ManagementFirmware Upgrade Factory DefaultImport Configuration File Export Configuration FileSyslog Log Tab System LogMail Log Tab System Statistics Log SettingCommon Problems and Solutions Appendix a TroubleshootingFor Windows 98 and Millennium Need to set a static IP address on a PCFor Windows XP For WindowsFor Windows 98 and Millennium Broadband Router Am not able to access the Router’s Web-based Utility Setup Need to set up a server behind my Router Application Start and End Protocol IP Address EnableApplication Start and End Protocol IP Address Enabled Click the DMZ Host tab Can’t get the Internet game, server, or application to workNeed to upgrade the firmware To start over, I need to set the Router to factory defaultFor Microsoft Internet Explorer 5.0 or higher For Netscape 4.7 or higherNeed to use port triggering My DSL service’s PPPoE is always disconnectingWhere is the Router installed on the network? Frequently Asked QuestionsIs IPSec Passthrough supported by the Router? Does the Router support IPX or AppleTalk?How can I block corrupted FTP downloads? Will the Router function in a Macintosh environment? What is DMZ Hosting?Is the Router cross-platform compatible? How many ports can be simultaneously forwarded?How do I get mIRC to work with the Router? How can I check whether I have static or Dhcp IP addresses?Appendix B Upgrading Firmware Figure B-1 Advanced Setup Tab System ManagementWindows 2000 or XP Instructions Windows 98 or Me InstructionsFigure C-3 MAC Address/Physical Address For the Router’s Web-based UtilityStarting the Utility Appendix D Using the RT042 UtilityRouter Information Usage Configuration ScreensFigure D-3 The On-Line Scheduler Hit Rate On-Line SchedulerPerformance Optimization Real Time UsageFigure E-1 Basic Setup Tab Network Appendix E The Setup WizardFigure E-4 Obtain an IP automatically Figure E-5 Static IP Shared Resources Appendix F Windows HelpNetwork Neighborhood/My Network Places Appendix G Glossary Broadband Router Broadband Router Broadband Router FCC Appendix H SpecificationsLimited Warranty Appendix I Warranty InformationFCC Statement Appendix J Regulatory InformationAppendix K Contact Information

RT042 specifications

The Linksys RT042 is a dual-band wireless router designed to deliver robust performance and extensive coverage for home and small office networks. As a product from Linksys, a leader in networking solutions, the RT042 stands out with its advanced features and technologies that cater to users' varying connectivity needs.

One of the main highlights of the Linksys RT042 is its dual-band capability. Operating on both the 2.4GHz and 5GHz frequencies, this router provides flexibility and minimizes interference, allowing users to choose the most suitable band for their devices. The 5GHz band is particularly useful for bandwidth-intensive applications such as gaming and HD video streaming, while the 2.4GHz band offers greater range for everyday activities like browsing and email.

The RT042 supports the latest Wi-Fi standards, including 802.11ac, which enhances overall speed and efficiency. Users can experience lightning-fast wireless speeds, making it an ideal choice for households with multiple devices connected simultaneously. The router also employs Multiple Input Multiple Output (MIMO) technology, which uses multiple antennas to improve signal quality and data throughput, ensuring a stable connection even in crowded environments.

Another notable feature is its four Gigabit Ethernet ports, allowing for wired connections to devices such as gaming consoles and desktop computers. These ports provide faster and more reliable connections compared to standard Ethernet. Additionally, the RT042 includes a USB port, enabling users to connect external storage devices or printers for easy sharing across the network.

Security is a top priority for the Linksys RT042, which comes equipped with advanced WPA2 encryption. This ensures that user data is protected from unauthorized access. Furthermore, the router includes features such as a firewall and VPN support, providing an added layer of security for sensitive information.

The RT042 is also designed with user-friendliness in mind. It features an intuitive web interface for easy setup and management, making it accessible even for those with limited technical knowledge. The router can be easily configured through a mobile app, allowing users to monitor their network from anywhere.

In summary, the Linksys RT042 is a versatile and powerful dual-band wireless router that combines advanced technology, robust security features, and user-friendly design. Whether for streaming, gaming, or everyday browsing, this router is an excellent choice for users looking to enhance their internet experience.
Top Page Image Contents