Linksys RT042 manual Static Routing, Enter the following data to create a static route entry

Page 29

Broadband Router

Transmit RIP versions: Choose a protocol for transmitting data on the network. (None, RIPv1, RIPv2-Broadcast, RIPv2-Multicast)

Static Routing

You will need to configure Static Routing if there are multiple routers installed on your network. The static routing function determines the path that data follows over your network before and after it passes through this Router. You can use static routing to allow different IP domain users to access the Internet.

In many cases, it is better to use dynamic routing (see above), as that allows the Router to automatically adjust to physical changes in the network's layout. In order to use static routing, the Router's DHCP settings must be disabled.

To set up static routing, add routing entries in the Router's table that tell the device where to send all incoming packets. All of your network routers should direct the default route entry to this Router.

Enter the following data to create a static route entry:

1.Destination IP: Enter the network address of the remote LAN segment. For a standard Class C IP domain, the network address is the first three fields of the Destination LAN IP, while the last field should be zero.

2.Subnet Mask: Enter the Subnet Mask used on the destination LAN IP domain. For Class C IP domains, the Subnet Mask is 255.255.255.0.

3.Default Gateway: If this Router is used to connect your network to the Internet, then your gateway IP is the Router's IP Address. If you have another router handling your network's Internet connection, enter the IP Address of that router instead.

4.Hop Count (max. 15): This value gives the number of nodes that a data packet passes through before reaching its destination. A node is any device on the network, such as switches, PCs, etc.

5.Interface (LAN, Internet1, Internet2): Select whether your network is on the LAN or one of the Internet ports. If you’re connecting to a sub-network, select LAN. If you’re connecting to another network through one of the Internet ports, select Internet1 or Internet2.

Click Add to list to add a static route entry or click Delete Selected IP to delete the static route entry.

Click the Save Settings button to save the Routing settings, click the Cancel Changes button to undo your changes or click the Show Routing Table button to view the current routing table.

Chapter 5: Setting Up and Configuring the Broadband Router

static routing: forwarding data in a network via a fixed path.

NOTE: Static Routing is an advanced feature. Please proceed with caution.

default gateway: a device that forwards Internet traffic from your local area network.

node: a network junction or connection point, typically a computer or work station.

23

Advanced Setup Tab - Advanced Routing

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Broadband Router Word definition How to Use this GuideCopyright and Trademarks Table of Contents Appendix D Using the RT042 Utility Appendix a TroubleshootingCommon Problems and Solutions Frequently Asked Questions Appendix B Upgrading FirmwareAdd/Edit New Applications List of Figures22 Service Management Welcome IntroductionFirmware the programming code that runs a networking device What’s in this Guide?Introduction What’s in this Guide? An Introduction to LANs Networking BasicsUse of IP Addresses Packet a unit of data sent over a networkUse of IP Addresses LEDs Getting to Know the Broadband RouterPorts Reset ButtonBack and Side Panels Overview Connecting the Broadband RouterConnect a PC Connection InstructionsSystem Summary Tab Setting Up and Configuring the Broadband RouterDomain a specific name for a network of computers Advanced Setup TabUser Usage How to Access the Web-based UtilitySystem Information ISP Bandwidth User BandwidthInternet Connection Type LAN SettingPptp Point-to-Point Tunneling Protocol Basic Setup Tab PasswordTime Basic Setup Tab TimeBasic Setup Tab MAC Clone Parental Control Tab Website Hit Rate Parental Control Tab On-Line SchedulerAdding/Editing New Applications Parental Control Tab Application UsageParental Control Tab Performance Optimization 19 Parental Control Tab Block List Parental Control Tab Block ListPort Range Forwarding Advanced Setup Tab DMZ HostAdvanced Setup Tab Forwarding Port Triggering Advanced Setup Tab UPnPDynamic Routing Advanced Setup Tab DdnsAdvanced Setup Tab Advanced Routing Enter the following data to create a static route entry Static RoutingAdvanced Setup Tab Remote Management Advanced Setup Tab VPN Pass ThroughDiagnostics Advanced Setup Tab System ManagementFirmware Upgrade Factory DefaultImport Configuration File Export Configuration FileMail Log Tab System LogSyslog Log Tab System Statistics Log SettingCommon Problems and Solutions Appendix a TroubleshootingFor Windows 98 and Millennium Need to set a static IP address on a PCFor Windows XP For WindowsFor Windows 98 and Millennium Broadband Router Am not able to access the Router’s Web-based Utility Setup Need to set up a server behind my Router Application Start and End Protocol IP Address EnableApplication Start and End Protocol IP Address Enabled Click the DMZ Host tab Can’t get the Internet game, server, or application to workNeed to upgrade the firmware To start over, I need to set the Router to factory defaultFor Microsoft Internet Explorer 5.0 or higher For Netscape 4.7 or higherNeed to use port triggering My DSL service’s PPPoE is always disconnectingWhere is the Router installed on the network? Frequently Asked QuestionsIs IPSec Passthrough supported by the Router? Does the Router support IPX or AppleTalk?How can I block corrupted FTP downloads? Will the Router function in a Macintosh environment? What is DMZ Hosting?Is the Router cross-platform compatible? How many ports can be simultaneously forwarded?How do I get mIRC to work with the Router? How can I check whether I have static or Dhcp IP addresses?Appendix B Upgrading Firmware Figure B-1 Advanced Setup Tab System ManagementWindows 2000 or XP Instructions Windows 98 or Me InstructionsFigure C-3 MAC Address/Physical Address For the Router’s Web-based UtilityStarting the Utility Appendix D Using the RT042 UtilityRouter Information Usage Configuration ScreensFigure D-3 The On-Line Scheduler Hit Rate On-Line SchedulerPerformance Optimization Real Time UsageFigure E-1 Basic Setup Tab Network Appendix E The Setup WizardFigure E-4 Obtain an IP automatically Figure E-5 Static IP Network Neighborhood/My Network Places Appendix F Windows HelpShared Resources Appendix G Glossary Broadband Router Broadband Router Broadband Router FCC Appendix H SpecificationsLimited Warranty Appendix I Warranty InformationFCC Statement Appendix J Regulatory InformationAppendix K Contact Information

RT042 specifications

The Linksys RT042 is a dual-band wireless router designed to deliver robust performance and extensive coverage for home and small office networks. As a product from Linksys, a leader in networking solutions, the RT042 stands out with its advanced features and technologies that cater to users' varying connectivity needs.

One of the main highlights of the Linksys RT042 is its dual-band capability. Operating on both the 2.4GHz and 5GHz frequencies, this router provides flexibility and minimizes interference, allowing users to choose the most suitable band for their devices. The 5GHz band is particularly useful for bandwidth-intensive applications such as gaming and HD video streaming, while the 2.4GHz band offers greater range for everyday activities like browsing and email.

The RT042 supports the latest Wi-Fi standards, including 802.11ac, which enhances overall speed and efficiency. Users can experience lightning-fast wireless speeds, making it an ideal choice for households with multiple devices connected simultaneously. The router also employs Multiple Input Multiple Output (MIMO) technology, which uses multiple antennas to improve signal quality and data throughput, ensuring a stable connection even in crowded environments.

Another notable feature is its four Gigabit Ethernet ports, allowing for wired connections to devices such as gaming consoles and desktop computers. These ports provide faster and more reliable connections compared to standard Ethernet. Additionally, the RT042 includes a USB port, enabling users to connect external storage devices or printers for easy sharing across the network.

Security is a top priority for the Linksys RT042, which comes equipped with advanced WPA2 encryption. This ensures that user data is protected from unauthorized access. Furthermore, the router includes features such as a firewall and VPN support, providing an added layer of security for sensitive information.

The RT042 is also designed with user-friendliness in mind. It features an intuitive web interface for easy setup and management, making it accessible even for those with limited technical knowledge. The router can be easily configured through a mobile app, allowing users to monitor their network from anywhere.

In summary, the Linksys RT042 is a versatile and powerful dual-band wireless router that combines advanced technology, robust security features, and user-friendly design. Whether for streaming, gaming, or everyday browsing, this router is an excellent choice for users looking to enhance their internet experience.
Top Page Image Contents