Linksys WRT54GS manual Cannot connect to the Internet

Page 58

Wireless-G Broadband Router with SpeedBooster

6.You may see the login status display as Connecting. Press the F5 key to refresh the screen, until you see the login status display as Connected.

•Click the Save Settings button to continue.

•If the connection is lost again, follow steps 1- 6 to re-establish connection.

17.I can’t access my e-mail, web or I am getting corrupted data from the Internet.

The Maximum Transmission Unit (MTU) setting may need to be adjusted. By default, the MTU is set at 1500. For most DSL users, it is strongly recommended to use MTU 1492.

•If you are having some difficulties, perform the following steps:

1.To connect to the Router, go to the web browser, and enter http://192.168.1.1 or the IP address of the Router.

2.Enter the password, if asked. (The default password is admin.)

3.Look for the MTU option, and select Manual. In the Size field, enter 1492.

4.Click the Save Settings button to continue.

•If your difficulties continue, change the Size to different values. Try this list of values, one value at a time, in this order, until your problem is solved:

1462

1400

1362

1300

18.When I enter a URL or IP address, I get a time-out error or am prompted to retry.

•Check if other PCs work. If they do, ensure that your workstation’s IP settings are correct (IP Address, Subnet Mask, Default Gateway, and DNS). Restart the computer that is having a problem.

•If the PCs are configured correctly, but still not working, check the Router. Ensure that it is connected and powered on. Connect to it and check its settings. (If you cannot connect to it, check the LAN and power connections.)

•If the Router is configured correctly, check your Internet connection (DSL/cable modem, etc.) to see if it is working correctly. You can remove the Router to verify a direct connection.

•Manually configure the TCP/IP settings with a DNS address provided by your ISP.

•Make sure that your browser is set to connect directly and that any dial-up is disabled. For Internet Explorer, click Tools, Internet Options, and then the Connection tab. Make sure that Internet Explorer is set to Never dial a connection. For Netscape Navigator, click Edit, Preferences, Advanced, and Proxy. Make sure that Netscape Navigator is set to Direct connection to the Internet.

19.I cannot connect to the Internet.

•For Cable users - Click on the Status tab and make sure you have the Internet IP address is not 0.0.0.0. If it is, click the DHCP Renew button, and wait a few minutes for the router to try and contact your service provider. After the router successfully obtains an IP address, restart your computer.

Appendix A: Troubleshooting

51

Common Problems and Solutions

Page 57 Page 59
Image 58
Page 57 Page 59
Contents 802 GHz .11g Wireless- G Copyright and Trademarks Word definitionTable of Contents Appendix B Wireless Security Appendix a TroubleshootingAppendix C Upgrading Firmware Appendix D Windows Help List of Figures Router’s Back Panel20 Wireless Tab Wireless Security WPA Enterprise Figure E-3 MAC Address/Physical Address Introduction WelcomeWhat’s in this Guide? Wireless-G Broadband Router with SpeedBooster Network Topology Planning Your Wireless NetworkAd-Hoc versus Infrastructure Mode Network LayoutPlanning Your Wireless Network Network Layout Getting to Know the Wireless-G Broadband Router Back PanelFront Panel Cisco logoConnecting the Wireless-G Broadband Router OverviewConnecting Your Network Devices Diagram for Connection to Another Router Connecting Your Network Devices Wireless-G Broadband Router with SpeedBooster Configuring the Wireless-G Broadband Router Password ScreenSetup Tab Basic Setup Internet SetupPPPoE Connection Type Telstra Cable Connection Type Router IP Time Setting Setup Tab Ddns DdnsSetup Tab MAC Address Clone 15 Setup Tab MAC Address CloneSetup Tab Advanced Routing 16 Setup Tab Advanced Routing GatewayWireless Tab Basic Wireless Settings 18 Wireless Tab Basic Wireless SettingsWireless Tab Wireless Security 19 Wireless Tab Wireless Security WPA Personal22 Wireless Tab Wireless Security WPA2 Enterprise 24 Wireless Tab Wireless Security WEP Wireless Tab Wireless MAC Filter 25 Wireless Tab Wireless MAC FilterWireless Tab Advanced Wireless Settings Wireless-G Broadband Router with SpeedBooster Security Tab Firewall 28 Security Tab FirewallSecurity Tab VPN Passthrough 29 Security Tab VPN PassthroughAccess Restrictions Tab Internet Access To create an Internet Access policyBlocked Services Applications and Gaming Tab Port Range Forward 34 Applications and Gaming Tab Port Range ForwardApplications & Gaming Tab Port Triggering Port TriggeringApplications and Gaming Tab DMZ Applications and Gaming Tab QoSWireless QoS Administration Tab Management Administration Tab LogAdministration Tab Diagnostics 40 Administration Tab DiagnosticsAdministration Tab Factory Defaults Administration Tab Firmware UpgradeAdministration Tab Config Management 45 Administration Tab Config ManagementStatus Tab Router 46 Status Tab RouterStatus Tab Local Network 48 Dhcp Clients TableStatus Tab Wireless 49 Status Tab WirelessCommon Problems and Solutions Appendix a TroubleshootingNeed to set a static IP address on a PC Wireless-G Broadband Router with SpeedBooster Open a command prompt. For Windows 98SE and Me Application Start and End Protocol IP Address Enabled Can’t get the Internet game, server, or application to work Wireless-G Broadband Router with SpeedBooster Need to upgrade the firmware To start over, I need to set the Router to factory defaultMy power LED will not stop flashing Firmware upgrade failed, and/or the Power LED is flashingCannot connect to the Internet My wireless-G speed seems to be slow How do I turn on SpeedBooster on my router?Where is the Router installed on the network? Frequently Asked QuestionsWhere is my SecureEasySetup button? Is IPSec Pass-Through supported by the Router?What is Network Address Translation and what is it used for? Does the Router support ICQ send file?How can I block corrupted FTP downloads? What is the Ieee 802.11g standard? What is DMZ Hosting?What are the advanced features of the Router? Is the Router cross-platform compatible?What is infrastructure mode? What Ieee 802.11b features are supported?What is ad-hoc mode? What is roaming?What is DSSS? What is FHSS? And what are their differences? What is ISM band?What is Spread Spectrum? What is WEP?How do I resolve issues with signal loss? Have excellent signal strength, but I cannot see my networkSecurity Precautions Appendix B Wireless SecuritySecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G Broadband Router with SpeedBooster Figure C-1 Upgrade Firmware Appendix C Upgrading FirmwareAppendix D Windows Help TCP/IPWindows 98SE or Me Instructions Windows 2000 or XP InstructionsFor the Router’s Web-based Utility Figure E-4 MAC Address Filter ListAppendix F Glossary Wireless-G Broadband Router with SpeedBooster Wireless-G Broadband Router with SpeedBooster Wireless-G Broadband Router with SpeedBooster Wireless-G Broadband Router with SpeedBooster Appendix G Specifications WRT54GSFCC, IC-03, CE, Wi-Fi 802.11b, 802.11g, WPA2, WMM Appendix H Warranty Information Limited WarrantyAppendix I Regulatory Information Wireless-G Broadband Router with SpeedBooster Wireless-G Broadband Router with SpeedBooster Wireless-G Broadband Router with SpeedBooster Wireless-G Broadband Router with SpeedBooster Wireless-G Broadband Router with SpeedBooster Wireless-G Router for Mobile Broadband Appendix J Contact Information
Related manuals
Manual 105 pages 46.42 Kb

WRT54GS specifications

The Linksys WRT54GS is a well-regarded wireless router that has earned its place in the annals of networking history due to its robust features and stellar performance. Initially released in the early 2000s, this model has become a favorite among both home and small business users, thanks to its reliability and ease of use.

One of the standout features of the WRT54GS is its support for the 802.11g wireless standard, which allows for data transfer rates up to 54 Mbps. This speed is sufficient for most everyday tasks such as browsing the web, streaming music, and even watching videos, making it a versatile choice for households with multiple devices. The router also includes backward compatibility with the older 802.11b standard, ensuring that users with older devices can still connect without issue.

The WRT54GS is equipped with a 4-port Ethernet switch, allowing for wired connections to additional devices. This is particularly advantageous for users who require stable, high-speed connections for gaming consoles or desktop computers. The Ethernet ports operate at speeds of up to 100 Mbps, further enhancing the overall network performance.

Security is a critical aspect of any networking device, and the WRT54GS does not disappoint. It supports various encryption protocols, including WEP, WPA, and WPA2, offering multiple layers of security to protect user data. The router also features a built-in firewall, which adds an additional layer of defense against external threats.

Another key characteristic of the WRT54GS is its user-friendly web-based interface, which simplifies the process of setting up and managing the network. Users can easily configure settings, set up parental controls, and manage connected devices without requiring advanced technical skills.

Additionally, the WRT54GS is renowned for its open-source firmware compatibility, enabling tech-savvy users to enhance its functionality with custom firmware options like DD-WRT or Tomato. These alternatives can unlock additional features such as improved bandwidth management, advanced VPN support, and enhanced wireless performance.

In summary, the Linksys WRT54GS is a reliable and versatile router with features that cater to a wide range of users. Its combination of robust wireless performance, extensive security options, and user-friendly configuration makes it an ideal choice for many. While more advanced options are available today, the WRT54GS remains a classic model that paved the way for future networking devices.
Top Page Image Contents