Chapter 1
Product Overview
Chapter 1:
Product Overview
Thank you for choosing the
Front Panel
Power (Green) The Power LED lights up and will stay on while the Router is powered on.
Ethernet (Green/Orange) The Ethernet LED
lights up green when the Router is connected to a device through the Ethernet port. If the LED is flashing, the Router is sending or receiving data over that port. The LED lights up orange when it is connected to Gigabit and green when it is connected to 10/100.
Internet (Green/Orange) The Internet LED
lights up green when there is a connection made through the Internet port. A flashing LED indicates network activity over the Internet port. The LED lights up orange when it is connected to Gigabit and lights up green when it is connected to 10/100.
USB (Green) The USB LED indicates when an external USB hard drive or USB flash disk is
connected to the Router.
Wireless (Green) The Wireless LED lights up
when there is a wireless connection. If the LED is flashing, the Router is sending or receiving data over the wireless network.
Security (Green) The Security LED indicates when wireless security is enabled.
Back Panel
USB The USB port is where you can connect an external USB hard drive or flash disk.
Internet The Internet port is where you will connect your cable or DSL Internet connection.
1, 2, 3, 4 These Ethernet ports (1, 2, 3, 4) connect the Router to computers on your wired network and other Ethernet network devices.
Reset There are two ways to reset the Router’s factory defaults. Either press and hold the Reset Button for approximately five seconds, or restore the defaults from Administration > Factory Defaults in the Router’s
Power The Power port is where you will connect the power adapter.