Linksys WAP11 v2.2 manual Wireless Tab

Page 16

Instant Wireless™ Series

Figure 6-11

Next, determine if the Access Point will deny access only to the MAC addresses you will specify, OR if the Access Point will allow access only to the MAC Addresses you will specify. Click the radio button next to the option that is appropriate.

Above the MAC Address fields, there is a pull-down menu. This pull-down menu is for selecting the number of computers on your wireless network. For computers one through ten on your wireless network, 1~10 is selected by default. If you have more than ten computers on your wireless network, use this pull-down menu to select 11~20, 21~30, etc., up to a maximum of 50 MAC Addresses.

Then, type the MAC Address(es) you wish to filter in the MAC Address fields.

When you’ve completed making any changes on this tab, click the Apply but- ton to save those changes or Undo to exit the Web-based Utility without saving changes. For more information on this tab, you can click the Help button.

Wireless Network Access Point

The Wireless Tab

Figure 6-12

Before making any changes to the Wireless tab, shown in Figure 6-12, please check your wireless settings on other systems, as these changes will alter the effectiveness of the Access Point. In most cases, these settings do not need to be changed.

•Beacon Interval. This value indicates the frequency interval of the beacon. A beacon is a packet broadcast by the Access Point to keep the network syn- chronized. A beacon includes the wireless LAN service area, the AP address, the Broadcast destination addresses, a time stamp, Delivery Traffic Indicator Maps, and the Traffic Indicator Message (TIM).

•RTS Threshold. This value should remain at its default setting of 2,432. Should you encounter inconsistent data flow, only minor modifications are recommended.

24

25

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Wireless Network Access Point Copyright & Trademarks Table of Contents Features Instant WirelessTM Network Access PointIntroduction Planning Your Wireless Network Package ContentsSystem Requirements Network TopologyWireless Network Access Point’s Ports Dipole Antenna ConnectorsPower Reset ButtonConnecting the Wireless Network Access Point Instant WirelessTM Series Instant WirelessTM Series Instant WirelessTM Series Configuring the Wireless Network Access Point Setup TabSetting WEP Encryption Instant Wireless Series Password TabStatus Tab Help Tab Log TabFilter Tab Wireless Tab Instant WirelessTM Series Appendix a Troubleshooting Frequently Asked QuestionsWhat is ISM band? What is Spread Spectrum?What is DSSS? What is FHSS? And what are their differences? What is WEP?TCP/IP Setup for Windows 95, 98, and Millennium Setting Up TCP/IP in WindowsSelect Specify an IP Address TCP/IP Setup for Windows TCP/IP Setup for Windows NTSelect Use the following IP Address Appendix C Glossary Instant WirelessTM Series Instant WirelessTM Series Instant Wireless Series Appendix D Specifications EnvironmentalAppendix E Warranty Information Technical Support RMA Issues FaxAppendix F Contact Information Sales InformationCopyright 2002 Linksys, All Rights Reserved

WAP11 v2.2 specifications

The Linksys WAP11 v2.2 is a wireless access point designed for small to medium-sized business and home users looking to expand their network capabilities. This device offers an appealing blend of features and technologies that cater to both ease of use and efficiency.

One of the primary features of the WAP11 v2.2 is its compatibility with the IEEE 802.11b wireless networking standard. Operating in the 2.4 GHz frequency band, this access point can deliver data rates of up to 11 Mbps under optimal conditions. This makes it well-suited for basic internet browsing, file sharing, and other low to moderate bandwidth applications.

A standout characteristic of the WAP11 v2.2 is its versatility in deployment. It can be easily configured to function in multiple modes, including access point, wireless bridging, or as a wireless repeater. This flexibility allows users to tailor the device to their specific networking needs, whether they are expanding an existing wireless network or creating a new one altogether.

The WAP11 v2.2 also includes robust security features to protect network data. It supports WEP (Wired Equivalent Privacy) encryption, which, while now considered less secure than modern protocols, was widely used during its time to provide a basic level of wireless security. Additionally, the access point offers MAC address filtering, allowing network administrators to whitelist or blacklist specific devices from accessing the network.

Installation and configuration of the WAP11 v2.2 is facilitated by a user-friendly web interface, making it accessible to users of all technical skill levels. The device can be set up quickly through a standard web browser, allowing users to easily manage settings like SSID, security options, and IP addressing.

In terms of physical characteristics, the WAP11 v2.2 features a compact design that allows for flexible placement in various environments. It includes a reset button for easy troubleshooting and recovery from erroneous settings, ensuring minimal downtime.

Overall, the Linksys WAP11 v2.2 is a solid choice for users looking to enhance their wireless network. Its combination of multiple operating modes, basic security features, and ease of use makes it a practical option for home offices or small business applications. Despite being an older model, it laid the groundwork for future advancements in wireless networking, reflecting the evolution of connectivity solutions over time.
Top Page Image Contents