Linksys WRT54GX4 manual Getting to Know the Wireless-G Broadband Router with SRX400

Wireless-G Broadband Router with SRX400

Chapter 3: Getting to Know the Wireless-G Broadband Router with SRX400

The Router’s Ports and Reset Button

The Router's ports and Reset button are located on one of the side panels.

	Figure 3-1: The Router’s Side Panel
ETHERNET
1, 2, 3, 4	Color-coded yellow, these ports connect the Router to PCs and other Ethernet devices on your
	network.
INTERNET	Color-coded blue, the INTERNET port is where you will connect your broadband Internet
	connection.
Reset	There are two ways to reset the Router's factory defaults. Either press the Reset button, which
	is color-coded red, for approximately five seconds, using a object with a sharp point, such as a
	ball-point pen, or restore the default settings from the Administration tab - Factory Defaults in
	the Router's Web-based Utility.
Power	Color-coded black, the Power port is where you will connect the power adapter.

port: the connection point on a computer or networking device used for plugging in cables or adapters

broadband: an always-on, fast Internet connection

IMPORTANT: Resetting the Router will erase all of your settings (wireless security, network settings, etc.) and replace them with the factory defaults. Do not reset the Router if you want to retain these settings.

Chapter 3: Getting to Know the Wireless-G Broadband Router with SRX400 6

The Router’s Ports and Reset Button