Linksys WRT54GX4 manual Static IP Connection Type

Page 18

Wireless-G Broadband Router with SRX400

•Static IP. If you are required to use a permanent IP address to connect to the Internet, select Static IP.

Internet IP Address. This is the Router’s IP address, when seen from the Internet. Your ISP will provide you with the IP Address you need to specify here.

Subnet Mask. This is the Router’s Subnet Mask, as seen by users on the Internet (including your ISP). Your ISP will provide you with the Subnet Mask.

Gateway. Your ISP will provide you with the Gateway Address, which is the ISP server’s IP address.

Static DNS 1-3. Your ISP will provide you with at least one DNS (Domain Name System) Server IP Address.

•PPPoE. Some DSL-based ISPs use PPPoE (Point-to-Point Protocol over Ethernet) to establish Internet connections. If you are connected to the Internet through a DSL line, check with your ISP to see if they use PPPoE. If they do, you will have to enable PPPoE.

User Name and Password. Enter the User Name and Password provided by your ISP.

Connect on Demand: Max Idle Time. You can configure the Router to cut the Internet connection after it has been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. In the Max Idle Time field, enter the number of minutes you want to have elapsed before your Internet connection terminates.

Keep Alive Option: Redial Period. If you select this option, the Router will periodically check your Internet connection. If you are disconnected, then the Router will automatically re-establish your connection. To use this option, click the radio button next to Keep Alive. In the Redial Period field, you specify how often you want the Router to check the Internet connection. The default Redial Period is 30 seconds.

Chapter 5: Configuring the Wireless-G Broadband Router

Figure 5-4: Static IP Connection Type

static ip address: a fixed address assigned to a computer or device connected to a network.

subnet mask: an address code that determines the size of the network

Figure 5-5: PPPoE Connection Type

pppoe: a type of broadband connection that provides authentication (username and password) in addition to data transport

12

The Setup Tab - Basic Setup

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Wireless- G How to Use This User Guide Copyright and TrademarksWord definition Table of Contents Common Problems and Solutions Frequently Asked Questions Appendix a TroubleshootingAppendix B Wireless Security Appendix C Upgrading Firmware Appendix D Windows HelpRouter’s Side Panel Connect a PC24 Security Tab Firewall Introduction WelcomeWhat’s in this Guide? Wireless-G Broadband Router with SRX400 Ssid your wireless network’s name Planning Your Wireless NetworkAd-Hoc versus Infrastructure Mode Network TopologyPlanning Your Wireless Network Network Layout Getting to Know the Wireless-G Broadband Router with SRX400 Router’s Ports and Reset ButtonBroadband an always-on, fast Internet connection Power Router’s LEDsConnecting the Wireless-G Broadband Router with SRX400 OverviewPlacement Options Stand OptionWall-Mount Option Configuring the Wireless-G Broadband Router Isp your internet providerSetup Tab Basic Setup Internet SetupInternet Connection Type Static IP Connection Type Pptp Connection Type Router IP Network SetupOptional Settings Packet a unit of data sent over a networkNetwork Address Server Settings Dhcp Time SettingSetup Tab Ddns DdnsSetup Tab MAC Address Clone Mac address the unique address that aAdvanced Routing Setup Tab Advanced RoutingNAT Mode Dynamic Routing16 Setup Tab Advanced Routing NAT Mode Routing Table Wireless Tab Basic Wireless Settings Wireless NetworkWireless Tab Wireless Security Wireless SecurityEncryption encoding data transmitted in a network 20 Wireless Tab Wireless Security WEP Wireless Tab Wireless MAC Filter Wireless MAC FilterWireless Tab Advanced Wireless Settings Advanced WirelessWireless-G Broadband Router with SRX400 VPN Pass Through Security Tab FirewallFirewall Block WAN RequestAccess Restrictions Tab Internet Access Internet AccessTo create an Internet Access policy Ftp a protocol used to transfer files over a TCP/IP network Url the address of a file located on the InternetApplications and Gaming Tab Port Range Forward Port Range ForwardPort Range Port Triggering Applications and Gaming Tab Port TriggeringApplications and Gaming Tab DMZ Triggered Range and Forwarded RangeInternet Access Priority QoS Quality of ServiceWireless Applications and Gaming Tab QoSSummary Port RangeCancel Changes button Local Router Access Administration Tab ManagementRouter Password Https Web AccessUPnP MulticastURL Filter Log Administration Tab LogSystem Log DoS LogTraceroute Test Administration Tab DiagnosticsPing Test Ping ParametersFactory Defaults Administration Tab Factory DefaultsAdministration Tab Firmware Upgrade Upgrade FirmwareAdministration Tab Config Management Backup ConfigurationRestore Configuration Status Tab Router Router InformationInternet Connection Status Tab Local Network Local NetworkStatus Tab Wireless WirelessInternet/Wireless Status Tab System PerformanceSystem Performance Wireless-G Broadband Router with SRX400 Appendix a Troubleshooting Common Problems and SolutionsNeed to set a static IP address on a PC For Windows 98SE, Me, 2000, and XP Open a command prompt. For Windows 98SE and Me Application Start and End Protocol IP Address Enabled TCPCan’t get the Internet game, server, or application to work Wireless-G Broadband Router with SRX400 Need to upgrade the firmware To start over, I need to set the Router to factory defaultMy power LED will not stop flashing My DSL service’s PPPoE is always disconnectingMy wireless-G speed seems to be slow Cannot connect to the InternetHow do I turn on SRX on my router? Frequently Asked QuestionsWhere is the Router installed on the network? Is IPSec Pass-Through supported by the Router?Does the Router support ICQ send file? How can I block corrupted FTP downloads?What is DMZ Hosting? What is the Ieee 802.11b standard? What are the advanced features of the Router?What is the Ieee 802.11g standard? Is the Router cross-platform compatible?What is ad-hoc mode? What Ieee 802.11g features are supported?What Ieee 802.11b features are supported? What is infrastructure mode?What is DSSS? What is FHSS? And what are their differences? What is ISM band?What is Spread Spectrum? What is WEP?How do I reset the Router? How do I resolve issues with signal loss?Have excellent signal strength, but I cannot see my network Appendix B Wireless Security Security PrecautionsSecurity Threats Facing Wireless Networks Security Threats Facing Wireless Networks Wireless-G Broadband Router with SRX400 Figure C-1 Upgrade Firmware Appendix C Upgrading FirmwareAppendix D Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Figure E-1 IP Configuration Screen Windows 98SE or Me InstructionsWindows 2000 or XP Instructions For the Router’s Web-based UtilityAppendix F Glossary Wireless-G Broadband Router with SRX400 Wireless-G Broadband Router with SRX400 Wireless-G Broadband Router with SRX400 Wireless-G Broadband Router with SRX400 Model Appendix G SpecificationsFCC, IC-03, CE, Wi-Fi 802.11b, 802.11g, WPA StandardsOperating Humidity Operating TempStorage Temp To 40 C 32 F to 104 FAppendix H Warranty Information Limited WarrantyAppendix I Regulatory Information FCC StatementWireless-G Broadband Router with SRX400 Wireless-G Broadband Router with SRX400 Wireless-G Broadband Router with SRX400 Wireless-G Broadband Router with SRX400 Dual-Band Wireless Access Point Appendix J Contact Information Need to contact Linksys?Information section in this Guide
Top Page Image Contents