Linksys E2000 manual Automatic Configuration Dhcp, Static IP, PPPoE, Minutes

Page 17

Linksys E2000

Automatic Configuration - DHCP

The default Internet Connection Type is set to Automatic Configuration - DHCP (Dynamic Host Configuration Protocol).. Keep the default only if your ISP supports DHCP or you are connecting using a dynamic IP Address.. (This option usually applies to cable connections..)

Internet Connection Type > Automatic Configuration - DHCP

Static IP

If you are required to use a permanent IP address to connect to the Internet, select Static IP..

Internet Connection Type > Static IP

Internet IP Address  This is the Router’s IP address, when seen from the Internet.. Your ISP will provide you with the IP Address you need to enter here..

Subnet Mask  This is the Router’s Subnet Mask, as seen by users on the Internet (including your ISP).. Your ISP will provide you with the Subnet Mask..

Default Gateway  Your ISP will provide you with the Gateway address, which is the ISP server’s IP address..

DNS 1-3 Your ISP will provide you with at least one DNS (Domain Name System) server IP address..

PPPoE

Some DSL-based ISPs use Point-to-Point Protocol over Ethernet (PPPoE) to establish Internet connections.. If you are connected to the Internet through a DSL line, check with your ISP to see if they use PPPoE.. If they do, you will have to enable PPPoE..

Internet Connection Type > PPPoE

Username and Password  Enter the Username and Password provided by your ISP..

Chapter 3: Advanced Configuration

Service Name (optional)  If provided by your ISP, enter the Service Name..

Connect on Demand: Max Idle Time  You can configure the Router to cut the Internet connection after it has been inactive for a specified period of time (Max Idle Time).. If your Internet connection has been terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again.. To use this option, select Connect on Demand.. In the Max Idle Time field, enter the number of minutes you want to elapse before your Internet connection terminates.. The default is

5minutes..

Keep Alive: Redial Period  If you select this option, the Router will periodically check your Internet connection.. If you are disconnected, then the Router will automatically re-establish your connection.. To use this option, select Keep Alive.. In the Redial Period field, specify how often the Router should check the Internet connection.. The default is 30 seconds..

PPTP

Point-to-Point Tunneling Protocol (PPTP) is a service that applies to connections in Europe only..

Internet Connection Type > PPTP

If your ISP supports DHCP or you are connecting through a dynamic IP address, then select Obtain an IP Address Automatically.. If you are required to use a permanent IP address to connect to the Internet, then select Specify an IP Address.. Then configure the following:

Specify an IP Address  This is the Router’s IP address, as seen from the Internet.. Your ISP will provide you with the IP Address you need to specify here..

Subnet Mask  This is the Router’s Subnet Mask, as seen by users on the Internet (including your ISP).. Your ISP will provide you with the Subnet Mask..

Default Gateway  Your ISP will provide you with the Gateway address, which is the ISP server’s IP address..

DNS 1-3 Your ISP will provide you with at least one Domain Name System (DNS) server IP address..

Advanced Wireless-N Router

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents User Guide Contents Limited Warranty Status Wireless NetworkAppendix D Regulatory Information Appendix E Software End User License AgreementBack Product OverviewTop Horizontal Placement Placement PositionsWall-Mounting Placement Two screws are needed to mount the RouterTo install the Router Insert the CD into your CD-ROM drive InstallationCisco Connect Double-click your CD-ROM driveInstallation is complete.. Click OK Plug the power adapter into an electrical outletWhen Cisco Connect starts up, the main menu appears Main MenuMain Menu Guest Access Local Access versus Guest AccessMain Menu Router Settings Main Menu Computers and DevicesComputer Connect with the Easy Setup KeyComputers and Other Devices Create or Update the Easy Setup Key Wireless PrinterPlease wait while settings are copied to the Easy Setup Key Connect ManuallyParental Controls First-Time Access of Parental ControlsParental controls screen appears Parental controls main screen appearsEnter the new name.. Then click Rename Restrict Internet Access ListSet Up Parental Controls Router Settings Guest AccessChange Parental Controls Password Router settings screen appearsChange Router Name or Password Easy Setup KeyClick Close to return to the Router settings screen Other OptionsHow to Access Cisco Connect How to Exit Cisco ConnectAdvanced Settings WindowsHow to Access the Browser-Based Utility Advanced ConfigurationSetup Basic Setup Internet SetupStatic IP Automatic Configuration DhcpPPPoE MinutesTelstra Cable Optional SettingsDhcp Server Setting Network SetupRouter IP Dhcp ReservationTime Setting Setup DdnsDdns Service DynDNS..orgSetup Advanced Routing Setup MAC Address CloneMAC Address Clone Advanced RoutingRouting Table Wireless Basic Wireless SettingsManual Setup Wi-Fi Protected Setup Security Mode Wireless Wireless SecurityPersonal Options Office OptionAccess Restriction Wireless Wireless MAC FilterWireless MAC Filter Advanced Wireless Wireless Advanced Wireless SettingsWireless Client List MAC Address Filter ListFirewall Security FirewallInternet Filter Web FilterInternet Access Policy Access Restrictions Internet AccessSecurity VPN Passthrough VPN PassthroughSingle Port Forwarding Applications and Gaming Single Port ForwardingApplications & Gaming Port Range Triggering Applications and Gaming Port Range ForwardingPort Range Forwarding Port Range TriggeringApplications and Gaming DMZ WirelessApplications and Gaming QoS QoSCategory Internet Access PriorityWeb Access Administration ManagementManagement MAC AddressLog Administration LogReboot Administration DiagnosticsDiagnostics Ping TestStatus Router Administration Factory DefaultsAdministration Firmware Upgrade Status Local Network Status Wireless NetworkClick OK Appendix a TroubleshootingClick the Connections tab Appendix B Specifications A, Canada, Asia Pacific, Australia, New Zealand Appendix C Warranty InformationObtaining Warranty Service Appendix D Regulatory Information Safety Notices Industry Canada StatementFCC Statement FCC Radiation Exposure StatementRestrictions dans la bande 5 GHz Wireless DisclaimerAvis d’Industrie Canada Linksys E2000 Cisco Products Appendix E Software End User License AgreementSoftware Licenses Schedule Cisco Software License AgreementLinksys E2000 Appendix E Software End User License Agreement Linksys E2000 Appendix E Software End User License Agreement Linksys E2000 Appendix E Software End User License Agreement Schedule 2-A Schedule Open Source and Third Party LicensesPreamble Version 2, JuneLinksys E2000 Appendix E Software End User License Agreement No Warranty Version 2..1, February Schedule 2-BLinksys E2000 Appendix E Software End User License Agreement Linksys E2000 Appendix E Software End User License Agreement Linksys E2000 Appendix E Software End User License Agreement END of Terms and Conditions END of Schedule 2-B Original SSLeay License Schedule 2-COpenSSL License END of Schedule 2-C 10012110NC-AI
Top Page Image Contents