3
WRT54G3G Setup for Broadband WAN Only
A B
C
D
E
Make sure that the 3G/UMTS Router is powered off.
Disconnect the cable that connects your cable or DSL modem to your PC.
Plug the cable from the modem into the Router’s blue Internet port. This is the same cable that you just disconnected from your computer.
The Router comes with a yellow network cable. Plug one end of the network cable into your computer's network port. Your computer's network port is the same port that was previously connected to the modem.
Plug the other end of the network cable into one of the Router’s yellow ports numbered 1 to 4.
B
C
D
E
4