Instant BroadbandTM Series
Status
This tab displays the current status of the Router; it reflects the data and selections you’ve entered under the Setup tab.
All of the information provided on this screen is
•Host Name This field shows the name of your Router. This entry is nec- essary for some ISPs.
•Firmware Version This field shows the installed version and date of the firmware. Version dates are slightly more accurate than version numbers.
•PPPoE
•LAN These fields display the current IP Address and Subnet Mask of the Router, as seen by users on your internal network.
•DHCP Server This field shows the status of the Router's DHCP server function, which is either enabled or disabled.
•WAN These fields display the WAN IP Address, WAN Subnet Mask and WAN Default Gateway IP address of the Router, as seen by external users on the Internet.
•DNS (Domain Name System) IP Address These fields show the IP Address(es) of the DNS currently used by the Router. Multiple DNS IP settings are common. In most cases, the first available DNS entry is used.
EtherFast® Cable/DSL & Voice Router powered by Net2Phone
DHCP
DHCP
A DHCP (Dynamic Host Configuration Protocol) Server automatically assigns IP addresses to each computer on your network. Unless you already have one, it is highly recommended that your router be set up as a DHCP server.
•DHCP Server Check the Enable option to enable the DHCP server option of the router. If you already have a DHCP server on your network, set the router's DHCP option to Disable.
•Starting IP Address Enter a numerical value for the DHCP server to start with when issuing IP addresses.
•Number of DHCP users Enter the maximum number of PCs that you want the DHCP server to assign IP addresses to, with the absolute maxi- mum being 253.
•DHCP Clients Table Click on the Clients Table button to show the cur- rent DHCP Client information. (This information is stored in temporary memory, so the list of clients could disappear.)
24 | 25 |