ADSL Gateway
Chapter 3: Getting to Know the ADSL Gateway
Ports and Reset Button on Side Panel
The Gateway’s ports and Reset button are located on a side panel.
Figure 3-1: Ports and Reset Button on Side Panel
Line | The Line port connects to the ADSL line. |
Ethernet
Reset Button There are two ways to reset the Gateway's factory defaults. Either press the Reset Button, for approximately ten seconds, or restore the defaults from the Factory Defaults screen of the Administration tab in the Gateway’s
Power | The Power port is where you will connect the power adapter. |
IMPORTANT: Resetting the Gateway to factory defaults will erase all of your settings (including Internet connection and other settings) and replace them with the factory defaults. Do not reset the Gateway if you want to retain these settings.
Chapter 3: Getting to Know the ADSL Gateway | 6 |
Ports and Reset Button on Side Panel