Linksys AG300 manual Configuring the Adsl Gateway, Setup

ADSL Gateway

Chapter 5: Configuring the ADSL Gateway

Overview

Follow the steps in this chapter and use the Gateway’s web-based utility to configure the Gateway. This chapter will describe each web page in the Utility and each page’s key functions. The utility can be accessed via your web browser through use of a computer connected to the Gateway. For a basic network setup, most users only have to use the following screens of the Utility:

• Basic Setup. On the Basic Setup screen, enter the settings provided by your ISP.

HAVE YOU: Enabled TCP/IP on your computers? Computers communicate over the network with this protocol. Refer to Windows Help for more information on TCP/IP.

•Management. Click the Administration tab and then the Management tab. The Gateway’s default username and password is admin. To secure the Gateway, change the Password from its default.

There are six main tabs: Setup, Security, Access Restrictions, Applications & Gaming, Administration, and Status. Additional tabs will be available after you click one of the main tabs.

Setup

•Basic Setup. Enter the Internet connection and network settings on this screen.

•DDNS. To enable the Gateway’s Dynamic Domain Name System (DDNS) feature, complete the fields on this screen.

•Advanced Routing. On this screen, you can alter NAT and routing configurations.

Chapter 5: Configuring the ADSL Gateway

NOTE: For added security, you should change the password through the Administration tab.

11

Overview